X hits on this document

17 views

0 shares

0 downloads

0 comments

1 / 7

Section 08520 - Aluminum Windows (M85 Series Specifications)

  • I.

    GENERAL:

    • 1.01

      Scope of Work

      • A.

        Furnish all necessary materials, labor, and equipment for the complete installation of aluminum windows for this project, including glass, hardware and related components, as shown on the drawings and herein specified.

1.02

Products Furnished but not Installed under this Section – List products, which are only supplied under this section, but may be installed “by others” or “by

owner.”

(Examples:

extra

sets

of

glazed

sash,

extra screens, position lock, etc.).

1.03

Products Installed but not Furnished under this Section – List products that are to be installed under this

section, owner.” etc.).

but may be supplied “by others” or “by (Examples: HVAC louvers, A/C units,

1.04 References (Where revision level dates are not indicated, it is

implicit that referenced).

the

most current

version is

A.

AAMA

American

Architectural

Manufacturers Association

  • 1.

    AAMA/WDMA/CSA 101/I.S.2/A440-05, “Standards/Specification for windows, doors, and unit skylights”.

  • 2.

    AAMA/WDMA/CSA 101/I.S.2/A440-08, “North American Fenestration Standard/ Specification for Windows, Doors, and Skylights”.

  • 3.

    AAMA 502, “Voluntary Specification for Field Testing of Newly Installed Fenes- tration Products”

4.

AAMA

505,

“Dry

Shrinkage

and

5.

Composite Performance Thermal Cycling Test Procedure” AAMA 506, “Voluntary Specifications for Impact and Cycle Testing of Fenestration

6.

Products” AAMA

510,

“Voluntary

Guide

Specification for Blast Hazard Mitigation for Fenestration Systems”

7.

8.

9.

AAMA 609/610, “Cleaning and Maintenance Guide for Architecturally Finished Aluminum” AAMA 611, “Voluntary Specification for Anodized Architectural Aluminum.” A A M A 7 0 1 / 7 0 2 , V o l u n t a r y S p e c i f i c a t i o n Weatherstripping for Pile and

Replaceable Fenestration Weatherseals”

  • 10.

    AAMA 800, “Voluntary Specifications and Test Methods for Sealants”

  • 11.

    AAMA 901, "Voluntary Specification for Rotary Operators in Window Applications"

  • 12.

    AAMA 902, “Voluntary Specification for Sash Balances”

  • 13.

    AAMA 904, "Voluntary Specification for Multi-Bar Hinges in Window Applications"

  • 14.

    AAMA 906, "Voluntary Specification for Sliding Glass Door Roller Assemblies"

  • 15.

    AAMA 910, “Voluntary ‘Life Cycle’ Specifications and Test Methods for Architectural Grade Windows and Sliding Glass Doors”

  • 16.

    AAMA 1302.5, “Voluntary Specifications for Forced-Entry Resistant Aluminum Prime Windows”

  • 17.

    AAMA 1503, “Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections”

  • 18.

    AAMA 1504, “Voluntary Standard for Thermal Performance of Windows, Doors and Glazed Wall Sections”

  • 19.

    AAMA 1505, “Voluntary Test Methods for Thermal Performance of Fenestration Products with Multiple Glazing Options”

  • 20.

    AAMA 1801, “Voluntary Specification for the Acoustical Performance Rating of

Windows, Sections”

Doors

and

Glazed

Wall

  • 21.

    AAMA 2603, “Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels.”

  • 22.

    AAMA 2604, “Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels.”

  • 23.

    AAMA 2605, “Voluntary Specification, Performance Requirements and Test

Page 1 of 7

M-85 Spec – Rev. 9/10

Document info
Document views17
Page views17
Page last viewedSat Dec 03 04:36:49 UTC 2016
Pages7
Paragraphs754
Words3644

Comments