X hits on this document

21 views

0 shares

0 downloads

0 comments

2 / 7

Procedures

for

Superior

Performing

Organic Coatings Extrusions and Panels.”

on

Aluminum

    • 24.

      AAMA IPCB (08), “Standard Practice for the Installation of Windows and Doors in Commercial Buildings.”

    • 25.

      AAMA CW-10, “Care and Handling of Architectural Aluminum from Shop to Site”

  • B.

    ASTM – American Society for Testing and Materials

  • 1.

    ASTM C 1036, “Standard Specification for Flat Glass”

  • 2.

    ASTM C 1048 “Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass”

3.

4.

5.

ASTM C 1172, “Standard Specification for Laminated Architectural Flat Glass” ASTM E 90, “Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements” ASTM E 283, “Standard Test Method for

Exterior

Windows,

and Doors

under

Determining

Rate

of

Air

throug Walls,

h

Leakage

Curtain Specified

6.

7.

Pressure Differences Across the Specimen” ASTM E 330, “Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference” ASTM E 331, “Standard Test Method for

C.

D.

Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference”

  • 8.

    ASTM E 413, “Classification for Rating Sound Insulation”

  • 9.

    ASTM E 547, “Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference”

  • 10.

    ASTM E 987, “Standard Test Methods for Deglazing Force of Fenestration Products”

  • 11.

    ASTM E 1048, “

  • 12.

    ASTM E 1332, “Standard Classification for Determination of Outdoor-Indoor Transmission Class”

  • 13.

    ASTM E 1423, “Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems”

  • 14.

    ASTM E 1425, “Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems”

Page 2 of 7

M-85 Spec – Rev. 9/10

15.

ASTM E 1886, “Standard Test Method

for Performance

of Exterior Windows,

Curtain

Walls,

Doors,

and

Impact

Protective Missile(s)

Systems Impacted and Exposed to

by Cyclic

16.

Pressure Differentials” ASTM E 1996, “Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes”

  • 17.

    ASTM E 2189, “Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units”

  • 18.

    ASTM E 2190 , “Standard Specification for Insulating Glass Unit Performance and Evaluation"

  • 19.

    ASTM F 588, “Standard Test Methods for Measuring the Forced Entry Resis- tance of Window Assemblies, Excluding Glazing Impact”

  • 20.

    ASTM F842, “Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact”

  • 21.

    ASTM F1233, “Standard Test Method

for Security Systems”

Glazing

Materials

and

CPSC – Commission

Consumer

Product

Safety

1.

CPSC16CFR1201, “Safety Standard for

Architectural Glazing Materials” NFRC – National Fenestration Rating Council

1.

NFRC 100-2010, Determin-ing Product values)”

“Procedure U-factors”

for (U-

2.

3.

4.

NFRC 102-2010, “Test Procedure for Measuring the Steady-State Thermal Transmittance of Fenestration Systems” NFRC 200-2010, “Procedure for Determining Fenestration Product Solar Heat Gain Coefficient and Visible Light Transmittance at Normal Incidence” NFRC 201-2010, “Procedure for Interim Standard Test Method for Measuring Solar Heat Gain Coefficient of Fenestration Systems Using Calorimetry

Hot Box Methods”

5.

NFRC

300-2010,

“Test

Method

for

6.

7.

Determining the Solar Optical Properties of Glazing Materials and Systems” NFRC 301-2010, “Standard Test Method for Emittance of Specular Surfaces Using Spectrometric Measurements” NFRC 400-2010, “Procedure for Deter- mining Fenestration Product Air Leakage”

Document info
Document views21
Page views21
Page last viewedSat Dec 10 01:27:49 UTC 2016
Pages7
Paragraphs754
Words3644

Comments