X hits on this document

26 views

0 shares

0 downloads

0 comments

5 / 7

Part Three: Operations

Key Programmer principle: Use the device to read the data of EWS (anti-thief control box), then write the data into a new key or key-chip. Please note, a key or key-chip can be written just once, can not be rewritten. That means the old key cannot be programmed again. The

key or key-chip which you want to be programmed must be new. 1. M1 (secure) mode

Take the “EWS 3 A ” of mask 2D47J as an example. Select this type then click [Zoom in], follow the related operations, click [Next]. As below shows:

Software will remind you switch to M1 mode, the red indicator light should light now, then click [OK] turn into following screen:

Document info
Document views26
Page views26
Page last viewedFri Dec 09 08:36:19 UTC 2016
Pages7
Paragraphs25
Words483

Comments