X hits on this document

57 views

0 shares

0 downloads

0 comments

10 / 26

Series-Parallel—Two Speakers (dual 2 ohm voice coils)

Note: Verify and ensure that the woofer wiring is connected as shown with the negative connection from the first woofer coil connected to the positive connection of the second woofer coil.

Two dual 2 ohm voice coil woofers with voice coils in series and then parallel the two series woofers results in a 2 ohm load to the amplifier.

-

-

-

-

2 ohm

2 ohm

2 ohm

2 ohm

  • +

    +

  • +

    +

+

-

1. Connect each woofer in series by connecting the negative (-) of the first coil to the positive (+) terminal of the second coil.

2. Wire the positive (+) terminal of the first coil on each woofer to the positive (+) terminal on the amplifier. Wire the negative (-) terminal of the second coil on each woofer to the negative (-) terminal on the amplifier.

10

Document info
Document views57
Page views57
Page last viewedFri Dec 02 23:11:04 UTC 2016
Pages26
Paragraphs557
Words5722

Comments