X hits on this document

PDF document

Volkswagen Jetta, Golf, GTI 1999, 2000 - page 16 / 22

79 views

0 shares

0 downloads

0 comments

16 / 22

Volkswagen Jetta, Golf, GTI 1999, 2000

2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP Lubrication system components, removing and installing (Page 17-13)

  • -

    Use a rotating brush to remove sealing residue from the oil pan, a hand drill with

plastic brushes for example-inset (wear protective glasses).

  • -

    Clean the sealing surfaces so that they are free of oil and grease.

Installing Notes: Ensure that the sealing compound has a valid expiration date.

The oil pan must be installed within 5 minutes after applying the silicon sealing compound.

  • -

    Cut the tubular nozzle off at the front mark (nozzle diameter approx. 3 mm).

  • -

    Apply the sealing compound to the cleaned sealing surface, as shown. The bead

must: be 2-3 mm thick run past the inside around the bores -arrows-

Document info
Document views79
Page views79
Page last viewedFri Jan 20 06:34:16 UTC 2017
Pages22
Paragraphs204
Words2107

Comments