X hits on this document

PDF document

Volkswagen Jetta, Golf, GTI 1999, 2000 - page 21 / 22

51 views

0 shares

0 downloads

0 comments

21 / 22

Volkswagen Jetta, Golf, GTI 1999, 2000

2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP Lubrication system components, removing and installing (Page 17-18)

Oil pressure switch, checking

  • -

    Remove the 1.4 bar oil pressure switch (F1) (black insulation) and screw it into the tester.

  • -

    Screw the tester into the oil filter housing in place of the oil pressure switch.

  • -

    Ground the tester brown lead (-).

  • -

    Connect the V.A.G 1527 B diode test lamp to the battery positive terminal (+) and to the oil pressure switch using the auxiliary cables from V.A.G 1594 A. The light- emitting diode (LED) should not illuminate.

If the LED illuminates:

  • -

    Replace the 1.4 bar oil pressure switch (F1)

If the LED does not illuminate:

page 17-8 , item -9-.

  • -

    Let the engine continue to idle. The light-emitting diode should light at 1.2-1.6 bar.

Otherwise, replace the 1.4 bar oil pressure switch (F1).

Document info
Document views51
Page views51
Page last viewedSun Dec 04 20:23:57 UTC 2016
Pages22
Paragraphs204
Words2107

Comments