X hits on this document

70 views

0 shares

0 downloads

0 comments

2 / 30

2009 Wildwood Water Utility Specifications

Updated 06/29/09

3.12 WATER METER INSTALLATION12

3.13USE OF FIRE HYDRANTS12 & 13

FIGURE 1BACKFLOW PREVENTERS14

FIGURE 2LARGE DETECTOR CHECK DETAIL15

FIGURE 32” DETECTOR CHECK DETAIL16

FIGURE 42” FIRE SERVICE CONNECTION DETAIL17

FIGURE 5TYPICAL LARGE FIRE SERVICE

CONNECTION DETAIL18

FIGURE 6FLOOR, VAULT AND SIDEWALK

DOORS19

FIGURE 74” COMPOUND METER INSTALLATION20

FIGURE 86” COMPOUND METER INSTALLATION 21

FIGURE 9TYPICAL FIRE HYDRANT

CONNECTION22

FIGURE 10HOUSE CONNECTION DETAIL

5/8" - 3/4" - 1" METERS23

FIGURE 11HOUSE CONNECTION DETAIL

1 1/2" - 2" METERS24

FIGURE 12TYPICAL LARGE & FIRE SERVICE

CONNECTION25

FIGURE 13TYPICAL LARGE SERVICE CONNECTION    26

FIGURE 14WATER METER MANIFOLD DIAGRAM27

FIGURE 15LARGE METER PIT SPEC COMBO28

FIGURE 162” DOMESTIC & FIRE SERVICE COMBO29

FIGURE 17SPRINKLER MANIFOLD30

                 DETAILED SPECIFICATIONS

1.0 GENERAL

The customers in the WILDWOOD WATER UTILITY service area depend on the WILDWOOD WATER UTILITY to provide safe, clean, potable water insufficient quantities and at adequate pressures for domestic and commercial consumption. To this end, the WILDWOOD WATER UTILITY must promulgate certain minimum standards of design, construction and use to protect the publics right to a safe water supply.

To ensure the continued reliable delivery of potable water for domestic consumption, commercial use, fire protection and other purposes, the WILDWOOD WATER UTILITY has adopted these specifications for the installation or modification of all water mains, services, and related appurtenances. To ensure the proper construction of all extensions and modifications to the WILDWOOD WATER UTILITY facilities, all said work must be reviewed, approved, tested, and sanitized to ensure that the minimum requirements of those specifications and provisions of the law are satisfied.

1.1DEFINITIONS AND ABBREVIATIONS

DEFINITIONS

The titles, subtitles, headings and table of contents used throughout these specifications are intended for the convenience of reference and shall not be considered to affect, limit, or cast light upon the interpretation of the provisions to which they refer. Whenever the words or expressions defined under this heading, or pronouns used in their stead, occur in these specifications, they shall have the following meanings:

2

Document info
Document views70
Page views70
Page last viewedThu Dec 08 12:37:59 UTC 2016
Pages30
Paragraphs411
Words6198

Comments