X hits on this document

197 views

0 shares

0 downloads

0 comments

67 / 97

OPTION NO.

DESCRIPTION

10.

Bidder to state size in gallons. Hood – Non Reflective Paint

  • 10.

    A. ___ Yellow

  • 11.

    Hub odometer

10. B.

___

Black

Chassis shall be equipped with one (1) hub odometer with standard mounting bracket, which shall be calibrated in miles and installed by the manufacturer

    • 11.

      A. ___ Left rear wheel (driver’s side)

    • 11.

      B. ___ Right rear wheel (passenger’s side)

  • 12.

    Hydraulic Brakes (59 - 90 passenger buses)

  • 13.

    Low profile tires Reduced tire size, which allows for lower bus height.

  • 14.

    Mud Flaps, with Brackets, mounted

15.

Sound Abatement Insulation for engine compartment

16.

Extra sound insulation for Type C buses (Shall reduce interior noise by four (4) decibels, minimum). Suspension, Improved Ride, Mechanical

17.

Designed to provide an enhanced, more comfortable ride than standard suspension. Rear axle only. Suspension, Improved Ride, Air

Rubberized mud flaps, complete with brackets, shall be installed behind each set of wheels. The mud flaps shall be comparable in size to the width of rear wheel housing and shall reach within approximately eight inches (8") off the ground when the bus is empty. They shall be mounted at a distance from the wheels that will permit free access to spring hangers for lubrication, and to prevent their being pulled off when the bus is moving in reverse. NOTE: Mud flaps may

display the manufacturer’s logo. 14. A. _____Rear mud flaps only

Both front and rear mud flaps

14. B.

_____

18.

Designed to provide an enhanced, more comfortable ride than standard suspension. Rear axle only. Telescoping Steering Wheel

Easily adjustable for different size drivers. Can be changed by driver while seated

Section F-4

Document info
Document views197
Page views197
Page last viewedFri Dec 02 19:01:44 UTC 2016
Pages97
Paragraphs2216
Words30825

Comments