Transmission – Extended Warranty
Vendor to state manufacturer’s basic months and mileage, and additional months and mileage. Transmission – Heavy Duty, Automatic
To upgrade from a 2500 PTS series transmission. Purchasers desiring a 3000 PTS heavy-duty transmission should seek additional information from the vendors. Bidder to state brand and torque rating. Transmission – Manual
The transmission shall be: Synchromesh type (all gears except first and reverse). The input torque capacity shall be at least equal torque developed by the engine.
35- to 90 passenger buses: transmissions with five (5) forward (direct in fifth) and one (1) reverse speed. The clutch in buses equipped with manual transmissions shall have a torque capacity not less than ten percent (10%) in excess of the maximum net torque output of engine. All chassis for the 24- through 59-passenger buses with manual transmissions shall be equipped with a minimum twelve-inch (12") diameter clutch. A starter interlock shall be installed to prevent actuation of the starter if the clutch is not depressed. Wheel, Spare, not mounted
(without carrier, tire, or tube). Wheel, Spare, Mounted (with carrier but no tire).
Wheel, Spare, Mounted with Carrier but no tire; For Type C & D buses only; Not available on Type A chassis. May not be available with extra capacity fuel tanks. Check with manufacturer for availability.
in driver’s seat. Note: May not be available on all size buses. Tires, Mud and Snow Tread
Designed with a tread style for added traction in snow and/or mud. (Rear wheels only). (Not available on 14 to 30 passenger Type A chassis) Tow Hooks, front and/or rear Mounted tow hooks (loops are acceptable); with minimum horizontal pull capacity of 28,000 pounds. Tow eyes or hooks shall be attached so they do not project beyond the front or rear bumper. Note: May not be available on all size
Front only 20. B.
Rear only 20. C.