X hits on this document

218 views

0 shares

0 downloads

0 comments

69 / 97

OPTION NO.

DESCRIPTION

26.

Tachometer

To indicate the engine’s RPM. Not available on Type A chassis.

BODY OPTIONS

27.

Acoustical ceiling panels

Sound reduction insulation panels for the interior roof of the bus.

28.

27. A. ____ First two body sections Air Conditioning, Performance Standard

27. B.

____

All body sections

29.

State style and system preferred _________________ Battery Compartment – Locking

30.

Locking battery box having outside access. Keyed the same as any other storage compartments. Crossing Gate (Student Safety Crossing Arm)

The bus shall be equipped with a crossing control arm mounted on the right side of the front bumper. This arm when opened shall extend in a line parallel with the body side and positioned on a line with the right side wheels. All components of the crossing control arm and all connections shall be weatherproof. The crossing control arm shall incorporate system connectors (electrical or air) at the gate and shall be easily removable to allow for towing of the bus. The crossing control arm shall meet or exceed SAE J1133.

The crossing control arm shall be constructed of non-corrosive or nonferrous material or treated in accordance with the body sheet metal specification. There shall be no sharp edges or projections that could cause hazard or injury to students. The crossing control arm shall extend approximately seventy inches (70") (measured from the bumper at the arm assembly attachment point) when in the extended position. The crossing control arm shall extend simultaneously with the stop arm(s) by means of the stop arm controls.

    • 30.

      A ____ Air Powered Crossing Gate 30.B ____ Electric Powered Crossing Gate

    • 30.

      C ____ Electro-magnetic latch 30.D _____ Deployment override switch (single cycle)

  • 31.

    Communication Device

System mounted in driver’s compartment for communication between driver and district’s management. Ordering entity must state current system for compatibility. Vendor must provide system compatible with: _______________________________________(state brand name)

32.

Defroster/heater

Section F-6

Document info
Document views218
Page views218
Page last viewedSun Dec 04 12:39:26 UTC 2016
Pages97
Paragraphs2216
Words30825

Comments