X hits on this document

265 views

0 shares

0 downloads

0 comments

79 / 97

SCHOOL BUS PURCHASER PRE-SERVICE CHECKLIST

Purchasing Entity: Retain this completed form with the title to the bus

Bus Number Assigned: Passenger Capacity: Body Manufacturer: Engine Manufacturer: Engine Arrangement No.: Engine O.T. Number: Transmission Type: Front Axle: Rear Axle: Primary Fuel Type: Date of Delivery:

Year Model: VIN Number: Body I.D. Number: Engine Type: Engine Serial No.: Chassis Number: Trans. Serial No.: Tank Capacity: Serial Number: Alternate Fuel Type: Delivered Mileage:

The following MUST be completed BEFORE THIS BUS IS PLACED INTO SERVICE.

A. ENGINE COMPARTMENT Check and top-off all fluid levels Check for Oil, Fuel, and Coolant leaks Check all belts for proper tensioning Check all belts for proper alignment.

B. AIR CLEANER Check filter element positioning and tightness Check cover and hold-down clamps for retention Check air inlet pipe for clearance/obstructions Tighten all air induction system clamps

Check freedom of throttle and ensure full throttle Check for unusual noises and/or vibrations

D. BRAKE SYSTEM

  • C.

    TRANSMISSION

    • Check for proper operation of neutral

and reverse switches

  • Check and top-off all fluid levels

  • Check for oil and coolant leaks

  • Check hose fitting tightness

  • Check for proper operation of shift sy

stem

  • Check for any air leaks.

  • Check operation of park brake

  • Check for leaks at wheels

  • Check routing of airlines for clearance

    • F.

      STEERING SYSTEM

  • Check hydraulic system for leaks & top-off

  • Check hose routing and clearance

  • Check hose ends for leaks and tightness

    • E.

      STATE INSPECTION AND DRIVERS AREA Check for cotter keys installed and property spread

  • State or DOT Inspection complet

  • License plates installed

  • All lights working

  • Windshield washer operating

  • Windshield wipers operating

  • Heaters and Defrosters working

  • Seats securely bolted to the floor

  • All publications included

ed

  • I.

    FUEL SYSTEM

    • Check fuel line routing for cleara

nce,

leakage, kinks and mounting tightness

on all steering components

  • G.

    REAR AXLE

    • Check and top off oil level

    • Check for leaks

    • Check for proper vent operation

.

  • H.

    CAB AREA

    • Triangular warning device mounted

    • First Aid Kit mounted

    • Bio Hazard Kit mounted

    • Fire Extinguisher mounted and charged

  • J.

    AIR CONDITIONING (if applicable)

    • Check for proper operation and refrigerant leaks

  • K.

    WHEELS AND TIRES

    • Inspect tires for damage

    • Check for proper inflation

  • L.

    TORQUE ALL WHEEL NUTS

    • Right Front

    • Left Front

    • Right Rear

    • Left Rear

COMPLETED BY:

DATE:

_________________________________

_____________________________

NOTES:

______________________________________________________________________________

Section G-2

Document info
Document views265
Page views265
Page last viewedFri Dec 09 16:04:44 UTC 2016
Pages97
Paragraphs2216
Words30825

Comments