X hits on this document

232 views

0 shares

0 downloads

0 comments

86 / 97

  • 3.

    Indicate manufacturer and body serial number, and maximum design capacity

  • 4.

    Indicate State and specification year manufactured for. IE: TX 08

____

REFLECTIVE MATERIAL: ____ a. Rear of Bus: 1. Horizontal above rear windows 2. Horizontal above rear bumper 3. Vertical strips connecting 1 & 2 above 4. Minimum 1 ¾” reflective yellow material b. Rear/Front of Bus: Reflective yellow background of “School Bus” signs (if not lighted) c. Side of Bus 1. Minimum 1 ¾” reflective yellow material full length of bus 2. Vertical location immediately below the seat rub rail 3. Reflective yellow background of “School Bus” signs (if not lighted) d. Bumpers, Front and Rear (Optional) 1. 450 diagonal strips, 2” + ¼” wide reflective material 2. Reflective material spaced 2”+ ¼” apart

____

____

____

____

SEAT, Barriers/Panels: 1. Barrier in front of each front passenger seat (See Spec for details) 2. Minimum 20”metal hand rail on both sides of entry door (Snag-proof design) 3. Must be upholstered

C-13

C-14

____

SEAT, Driver’s: 1. High back suspension seat Type C & D buses only 2. Cushion and seat back made of soil and wear resistant material 3. Squared and centered +/-1/2 inch behind steering wheel 4. Backrest a minimum of 11 inches behind steering wheel 5. Securely mounted to ensure minimal flexing 6. Type A bus may have manufacturer’s standard seat 7. Shoulder height adjustable or integrated lap/shoulder belt with automatic retractors in mounting C-3

brackets

____

SEAT, Passenger:

C-13

1. All buses have eight (8) designated seating positions with rigid lower anchorages or lap belts for the installation of portable child restraints

  • 2.

    All positions should be as far forward as possible

  • 3.

    Activity style seats are exempt from the above requirement

  • 4.

    Not reduce the seating capacity of the bus

  • 5.

    Lap belts for each position required on Type A

  • 6.

    Non-adjustable end be on the aisle side and not extend more than 2 inches from seat bight

  • 7.

    Fire resistant vinyl upholstery

____

SIDE EMERGENCY EXITS AND ROOF HATCH (ES): Reflective material around perimeter each exit 1. Up to 42 passengers - 1 emergency exit per side and 1 roof hatch 2. 43 to 78 passengers - 2 emergency exits per side and 2 roof hatches 3. 79 to 90 passengers - 3 emergency exits per side and 2 roof hatches Note: A side emergency door may be substituted for 2 emergency exits on the same side of the vehicle C-6

STEP-WELL: ____ a. Type D 24 thru 90 passengers

____

  • 1.

    First step 12” to 16” from ground, unloaded

  • 2.

    3 steps with risers max of 10”

C-15

Section G-9

Document info
Document views232
Page views232
Page last viewedWed Dec 07 00:00:28 UTC 2016
Pages97
Paragraphs2216
Words30825

Comments