3M Europe, Effective August-2014
Scotchcal™ ElectroCut™ Graphic Film 7725
These cast films are designed to create unique, special effect applications. The dusted crystal film has the uniform appearance of etched glass, the frosted crystal ones have the appearance of sand-blasted glass.
Product Line Window decoration
7725-314 7725-323 7725-324 7725-326 7725-327 7725-331
dusted crystal, translucent, matte, permanent adhesive. frosted rose, translucent, matte, permanent adhesive. frosted crystal, translucent, matte, permanent adhesive. frosted green, translucent, matte, permanent adhesive. frosted blue, translucent, matte, permanent adhesive. frosted gold, translucent, matte, permanent adhesive.
These are typical values for unprocessed products. Contact your 3M representative for a custom specification.
Physical & Application Material Surface finish Thickness (film)
Adhesive type Adhesive appearance Liner Adhesion
cast vinyl matte 50 µm (0.05 mm) dusted films 90 µm (0.09 mm) frosted films solvent acrylic, pressure-sensitive white transparent synthetic approx. 17 N/25 mm FTM 1: 180° peel, substrate: glass; cond: 24 h 23°C/50%RH
Application method Applied shrinkage Application temperatu
wet or dry < 0.3 mm +10°C
FTM 14 minimum (air and substrate)
Service temperature Surface type Substrate type
29°C to +80°C
flat aluminum, glass, PMMA, PC*, ABS, paint
PC*, PETG*: Might require drying with heat before use
Hard to remove from supported substrates.
Storage Shelf life
Use within two years from the date of manufacture on the sealed original box. Use within one year after opening the box.
+4°C to +40°C, out of sunlight, original container in clean and dry area.
Flammability Flammability standards are different from country to country. Ask your local 3M contact for details, please.
Product Bulletin 7725-3x
page 1 of 3