X hits on this document

2 views

0 shares

0 downloads

0 comments

1 / 2

ISF 1050

PRODUCT DATA SHEET

NOVOCON® ISF 1050 STEEL FIBRE

Novocon® ISF1050, steel fibres are designed specifically for the reinforcement of concrete, mortars and other cementitious mixes. Novocon® ISF1050 is a cold drawn wire fibre, continually deformed to provide optimum performance within the concrete mix. Novocon® ISF1050 steel fibres are ASTM compliant and specifically designed to meet or exceed the defined performance requirements.

FEATURES & BENEFITS

  • Provides uniform multi-directional concrete reinforcement

  • Increases crack resistance, ductility, energy absorption or toughness of concrete

  • Improves impact resistance, fatigue endurance and shear strength of concrete

  • High tensile strength fibre bridging joints and cracks to provide tighter aggregate interlock resulting in increased load carrying capacity

  • Provides increased ultimate load bearing capacity which allows possible reduction of concrete section

  • Requires less labour to incorporate into concrete than conventional reinforcement

  • Offers economical concrete reinforcement solutions with greater project scheduling accuracy

  • Ideally suited for hand or vibratory screeds, laser screeds and all conventional finishing equipment

PRIMARY APPLICATIONS

  • Ground supported slabs

  • Suspended ground slabs

  • Jointless floors

  • External roads & pavements

COMPLIANCE

  • Conforms to ASTM A820/A820M-04,Type 1 cold drawn wire

  • Testing conforms with ASTM C 1116, ASTM C1018 and JCI SF4

PHYSICAL PROPERTIES

Fibre Length

50mm

Fibre Diameter

1.0mm

Aspect Ratio

50

Tensile Strength

1100N/mm²

Deformation

Continuously deformed

Appearance

Bright and clean wire

D

GEOMETRY NOVOCON ISF 1050 FIBRES:

L

A

D = 1.00mm L = 50.00mm A = 8.00mm B = 1.30mm

For those who prefer performance to tradition

B

Document info
Document views2
Page views2
Page last viewedMon Oct 24 07:57:43 UTC 2016
Pages2
Paragraphs94
Words1138

Comments