X hits on this document

9 views

0 shares

0 downloads

0 comments

4 / 5

MCS 005

Product certification scheme requirements

Issue: 2.0 Date: 15/07/08

Solar Photovoltaic Modules

Page 4 of 5

    • 7.2

      Product audits Product audits will be conducted as follows:

      • 7.2.1

        review of the product technical data files including materials

      • 7.2.2

        review of end of line tests in accordance with the manufacturer's quality plan

      • 7.2.3

        repeat testing of elements from the product standard as appropriate to confirm that the product continues to meet the requirements for certification and listing.

8.

Certification Mark and labelling

All approved products listed under this scheme shall be traceable to identify that they have (marked with a label to confirm that the product has) been tested and certificated in accordance with the requirements of the test standard. See below for details.

The Supplier shall use (the) Certification Mark(s) (only) in accordance with the Certification Bodies' instructions

An example of the certification mark that can be used for this scheme is as follows:

Approved product

Certificate No. XXX, approved to EN 61215 or EN 61646

Where ‘XXX’ is the certificate number and the logo of the certification body issuing the certification would sit where the BRE Global mark is shown.

Companies may only use the mark while the certification is maintained.

This document is the property of the Department for Business Enterprise and Regulatory Reform (BERR), 1 Victoria Street, London, SW1H 0ET.

© BERR 2008

Document info
Document views9
Page views9
Page last viewedSat Dec 03 23:13:11 UTC 2016
Pages5
Paragraphs147
Words1537

Comments