X hits on this document

Word document

TECHNICAL GUIDE SPECIFICATIONS - page 6 / 12

27 views

0 shares

0 downloads

0 comments

6 / 12

Battery ok:  Battery voltage is within an acceptable range

Battery bad:  Battery voltage is out of range

2.4.2.4Input Voltage Status

Input ok:  Input voltage and frequency are within the acceptable range

Input bad:  Input voltage and/or frequency is within an acceptable range

2.4.2.5Battery Charger Status

Charger on:  Battery charger is charging or keeping batteries at float voltage

Charger off:  Battery is being charged

2.4.2.6System Internal DC Buss

DC ok:  DC buss is within the acceptable range

DC bad:  DC buss is out of the acceptable range

2.4.2.7Static Bypass Status

On inverter:  Critical load is being powered and protected by the inverter

On by pass:  Critical load is being powered from utility power

2.4.2.8Inverter Output Status

Out ok:  Output is within an acceptable range; critical load is being powered by the inverter

Out bad:  No output is available from the inverter and the critical load is being powered from utility power

2.4.3Metering Display

Output voltage

Output power

Input voltage

Input current

DC buss

Battery voltage

Battery current (+) Charging (-) Discharging

2.4.4Events and Data Logging – Optional

UPS Events time and date stamp of up to 50 scrolling events with freeze function

Aux. Output CB Trip – up to 20 circuit breakers; Trip alarm on 1st priority trip screen

2.4.5System Utilization Screen – Optional

Minutes on Battery:  Accrued time for UPS in battery backup mode

System Hours:  Accrued time for UPS in normal operation

6005-033 Rev. B                                                        Page 6 of 12

Document info
Document views27
Page views27
Page last viewedFri Oct 28 12:23:45 UTC 2016
Pages12
Paragraphs476
Words5003

Comments