PowerFlex™ Power Steering Hose Ends
Use With PowerFlex™ Hose For Power Steering Applications
C oose from a wide variety of lig tweig t AN style adapter fittings
(see pages 13 t ru 18)
Power Steering Adapters
Russell Power Steering Adapters are designed to ensure t e reliability required in a ig pressure steering system. T ese adapters allow t e use of #6 PowerFlex™ Hose and Hose Ends for a lig tweig t, trouble-free system.
4033 4038 4805 4806 4807
#6 to 1/2”-20 Inverted Flare #6 to 5/8” - 18 Inverted Flare #6 to 11/16” - 18 Inverted Flare #6 to 16mm x 1.5 O-ring Seal #6 to 14mm x 1.5 O-ring Seal
• • •
Available in t ree AN sizes, #6, #8 and #10 Suitable for ig pressure power steering use
Unique ultra brite Endura™ finis
ose ends are corrosion resistant
Male AN Adapter Identification Chart
T e line drawings below depict actual sizes of t e various common AN t read sizes by das number. Lay your fitting over t e appropriate drawing to determine w at size fitting you may ave.
B-Nut Size Chart T e line drawings above depict actual sizes of t e various common types of fittings.
Common Types Of Fittings
Pipe Thread Fittings
T ese drawings grap ically illustrate t e various types of fittings w ic are commonly found in automotive plumbing systems.
T e two most common types of fittings found in t e Russell line are t e AN 37˚ style and t e fitting style wit pipe t reads on it. A few specialized Russell fittings utilize t e inverted flare.
Sealing Style: 37˚ Thread Type: SAE
Sealing Style: Taper Thread Thread Type: NPT
To identify pipe t read sizes, place edge of fitting against base line and read fitting size w ere t e outer diameter intersects t e vertical line. Note ow 3/4” pipe indicated by das ed circle intersects t e vertical line.