X hits on this document

184 views

0 shares

0 downloads

0 comments

41 / 56

Fuel Line Dual Inlet Kits

For Fuel Transfer Between Carburetor and Fuel Pump

#6 Dual Inlet Carburetor Kit For Holley®

The #6 Dual Inlet Carburetor Kit is by far the finest customi ing modification that the serious enthusiast can give his car. This high quality kit features: precision mandrel bent tubes and ProFlex™ Race Hose with Tube Seal™ connections. Tubes are professionally dip-bra ed and finished in high luster anodi e. It comes fully assembled and can be adjusted to all styles of dual-feed Holley® Carburetors (except 4010/4011) by simply loosening the Tube Seal™ Hose Ends and adjusting the ProFlex™ hose to the desired length. Design includes a fuel gauge port. Inset si e 3/8” NPT. Comes complete with a 0-15 psi liquid filled fuel pressure gauge (#4110) or without a gauge (#4109)

Part # 4109

Description #6 Dual Inlet Kit for Dual Feed Holley® (except 4010/4011) without gauge, #6 ProFlex™ stainless steel braided hose with Tube Seal™ connections, 3/8” NPT inlet, 1/8” inlet port for optional pressure gauge. #6 Dual Inlet Kit for Dual Feed Holley® (except 4010/4011) with gauge, #6 ProFlex™ stainless steel braided hose with Tube Seal™ connections, 3/8” NPT inlet, includes 0-15 psi liquid filled fuel pressure gauge.

Application Dual Feed Holley® (except 4010/4011)

4110

Dual Feed Holley® (except 4010/4011)

#6 Dual Inlet Carburetor Kit For Holley® Dominator

For the serious enthusiast who desires maximum reliability, this fully assembled kit is especially popular in circle track racing where it can handle high pressure and heat for extended periods of time. This kit features ProFlex™ Race Hose with Full Flow™ Hose Ends for screw-on

connections. Although this fully assembled kit is designed for the 1150 Holley® Dominator carburetor, it can be adapted to fit the smaller Holley® dual feed models by simply shortening the length of the ProFlex™ Hose. Inlet si e is 3/8” NPT. Includes a fuel gauge port.

Part # 4111

Description #6 Dual Inlet Kit for 4500 Holley® Dominator without gauge, #6 ProFlex™ stainless steel braided hose and Full Flow™ Hose ends for screw-on connections, 3/8” NPT inlet, 1/8” inlet port for optional pressure gauge.

Application 4500 Holley® Dominator Series

#6 Dual Inlet Carburetor Kit For Holley® 4010/4011

This fully assembled inlet kit features precision mandrel bent tubes allowing for the optimum in fuel flow. Offers precise clearance for use with most low profile air clean- ers. Assembled with ProFlex™ Race Hose and Full Flow™ Hose Ends which are professionally anodi ed in red and blue with a 3/8” NPT thread inlet. Come complete with a 0-15 psi liquid filled pressure gauge (#4113) or may be purchased without a gauge (#4112). Includes a fuel gauge port.

Part # 4112

Description #6 Dual Inlet Kit for 4010/4011 Holley® without gauge. #6 ProFlex™ stainless steel braided hose and Tube Seal™ Hose Ends, 3/8” NPT inlet, 1/8” inlet port for optional pressure gauge. #6 Dual Inlet Kit for 4010/4011 Holley® with gauge, #6 ProFlex™ stainless steel

Application 4010/4011 Holley®

4113

4010/4011

braided hose and Tube Seal™ Hose Ends, 3/8” NPT inlet, includes 0-15 psi liquid filled fuel pressure gauge.

Holley®

41

Document info
Document views184
Page views186
Page last viewedThu Dec 08 03:13:42 UTC 2016
Pages56
Paragraphs5786
Words21418

Comments