X hits on this document

193 views

0 shares

0 downloads

0 comments

52 / 56

52

Accessories

Carburetor Throttle Brackets

Russell offers two unique carburetor throttle brackets, one will work on both vehicles with automatic or standard transmission, while the other is designed specifically for standard transmissions. They fit any brand of 2bbl or 4bbl carburetors on any vehicle. These brackets are particularly useful when changing to a non-stock aftermarket carburetor or on engine or transmission changeovers. The main advantage of these brackets over similar units is their high degree of adjustability. The automatic unit also provides for transmission

kickdown cable.

Part #

Description

11068

Throttle Bracket-Chrome

11069

Throttle Bracket w/AT-Chrome

Ultra Tech™ Carburetor Throttle Bracket

Ultra Tech™ Throttle Brackets are ideal when changing to a non-stock, aftermarket carburetor or on engine/transmission changeovers. Engineered to work on vehicles with standard or automatic transmis- sions. It is manufactured from lightweight aluminum featuring a high degree of adjustability and is furnished with a double spring for precise throttle return. This unit provides for transmission kickdown cables on automatic transmissions. Available in red or blue anodi e with Allen head fasteners for show appearance.

Part # 11090 11091

Description Throttle Bracket with Return Springs - Red Throttle Bracket with Return Springs - Blue

Spark Plug Dividers

Designed for the serious enthusiast, Russell’s high tech Spark Plug Divider Brackets allow a positive way of routing plug wires away from hot exhaust systems. They are manufactured from 1/8” aluminum plate and are designed for a universal fit on any V8 application. Professionally

anodi ed in red, blue or aluminum finishe

s.

Part #

Anodize Color

Description

4487

Red

Universal V8

4488

Blue

Universal V8

4489

Aluminum Finish

Universal V8

Center Bolt Spark Plug Wire Dividers

These spark plug wire dividers are specifically designed to fit 1987 and later small block General Motors centerbolt valve covers. They can be used with both front and rear mounted ignition systems and include all the necessary mounting hardware. Constructed from polished billet aluminum and available in three professional looking finishes of red, blue and clear anodi e.

Part #

Description

11146

Spark Plug Wire Divider - Aluminum

11147

Spark Plug Wire Divider - Red

11148

Spark Plug Wire Divider - Blue

Document info
Document views193
Page views195
Page last viewedFri Dec 09 01:37:25 UTC 2016
Pages56
Paragraphs5786
Words21418

Comments