X hits on this document

7 views

0 shares

0 downloads

0 comments

1 / 2

Adjustments

Warning! Before riding, always make sure that the basic settings made by Öhlins are according to recommended Set-up Data. Read about adjustments and setting up in the Öhlins Owner’s Manual before you make any adjustments. Contact an Öhlins dealer if you have any questions about setting up the shock absorber.

Öhlins Shock Absorber YA 993

Spring Preload Adjuster

Rebound Damping Adjuster (Black)

Compression Damping Adjuster (Gold)

Set-up Data

Recommended set-up

Spring preload

4 turns (8 mm)

Rebound damping

10 clicks

Compression damping 10 clicks

CSC damping

18 clicks

Shock absorber data

Length

491 mm

Stroke

135 mm

CSC Adjuster

Free sag and Ride height

Free sag, rear Free sag, front Ride height, rear Ride height, front

30±5 mm 30±5 mm 100-105 mm 50±5 mm

Öhlins products are subject to continuous improvement and development, therefore, although these instructions include the most up-to-date information available at the time of printing, minor updates may occur.

o find the latest information contact your Öhlins distributor. Please consult your Öhlins dealer if you have any questions regarding the contents in this document.

Part no. YA_993_0 Issued 2008-10-13

© Öhlins Racing AB. All rights reserved. Any reprinting or unauthorized use without the written permission of Öhlins Racing AB is prohibited.

Öhlins Racing AB Box 722 S-194 27 Upplands Väsby, Sweden Phone +46 8 590 025 00 fax +46 8 590 025 80

www.ohlins.com

Before installing this product, check the contents of the kit. If anything is missing, please contact your nearest Öhlins dealer.

Part No.

Pcs.

Shock absorber

YA993

1

Spring clip

00629-06

1

C-spanner

00710-02

1

Öhlins Sticker

00197-01

2

Memo notes Sticker

01180-01

1

Information sheet

01198-01

1

Owner’s Manual

07253-01

1

Kit Contents

Note! No spring included in this kit. See the Spring Guide in this folde , or contact an Öhlins dealer

for advise.

Please note transportation,

that during storage and especially at high ambient

temperature, some of the oil and grease used for assembling may leak and stain the packaging. This is in no way detrimental to the product, wipe off the excessive oil/grease with a cloth.

Warning! Before installing this product, read the Öhlins Owner’s Manual. The shock absorber is an important part of your vehicle and may affect the stability of your vehicle.

Shock Absorber for Yamaha YZ 250F 2009

YA 993

Mounting Instructions

Document info
Document views7
Page views7
Page last viewedSun Oct 23 12:02:20 UTC 2016
Pages2
Paragraphs149
Words828

Comments