X hits on this document





4 / 9

ARB Air Compressors

x Built with sealed components for moisture and dust resistance.

x Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and maximum trouble free life.

x Ducted IP55 sealed brushless DC cooling fan and anodized motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).

x Anti-vibration / sound deadening is integrated into the mount.

x Relocatable splash resistant air filter assemblies for cleaner, cooler air supply and versatile waterproof air intake positioning.

x High density and high flow washable sintered bronze air filter elements.

x Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids)

x Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.

x Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.

x Motors are internally thermal protected against extreme temperature damage.

x Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing.

x Over-pressure safety valve equipped.

x Sealed illuminated automotive grade dash switch included.

x Fully serviceable and all replacement parts available.

x EMF suppressed for use in proximity to sensitive electronic equipment.

x CE and C-Tick compliant.

x Engineered, built, and individually dyno-tested in Australia from local and imported components.

Document info
Document views30
Page views32
Page last viewedSun Oct 23 06:24:12 UTC 2016