Assembly Sequence Is Your Choice
Top mounting: Attach modules one-by-one to installed rails.
Top Mounting Clamps
Bottom Mounting Clips
SolarMount T-bolts quickly mount your modules to any SolarMount rail from the top. This is ideal for flush mount applications, such as residential rooftops, where it is most convenient to secure footings and rails before installing modules. Clamps securely grip any point of the module frame, freeing you from the constraints of module mounting holes.
Use bottom mounting clips (standard and HD rail only) whenever you prefer to attach rails directly to the module mounting holes. Simply fit the clip into its rail slot over the mounting bolt for a secure connection. Adjust the clip position anywhere along the rail slot. Alignment of rails to module mounting holes is always easy and convenient.
In shared-rail configurations (standard and HD rail only), attach modules with four-slot junction plates. North-south slots secure the rail to the plates. East-west slots secure a module on each side of the rail.
Bottom mounting: Preassemble full rows before final installation (standard and HD rail only).