X hits on this document

PDF document

MATERIAL SAFETY DATA SHEET - page 7 / 8

32 views

0 shares

0 downloads

0 comments

7 / 8

Activated Alumina (All Grades), Solid

WHMIS Number: 00062014 Page 7

Xebec Inc. Date of Revision: 2006 February 10

Deactivating Chemicals: None required.

Waste Disposal Methods: This information applies Reevaluation of the product may be required by

to the material as manufactured. the user at the time of disposal since the

product uses, transformations, mixtures and pro

cesses may influence waste classification.

Small quantities (less than 25 Kg) of unused por normal, non-hazardous industrial wastes. Large

tions of this product may be discarded with quantities (25 Kg or more)of unused portions

of this product may be discarded with normal, n

should be cleared with the intended recipient. done in accordance with local regulations.

on-hazardous wastes, however such disposal Disposal of post-service material must be

The product may pose new hazards as a result of

its use. It may be necessary to test the

post-service flash point and/or leachable heavy ethylbenzene and xylene (BTEX) as well as total

materials, and/or benzene, toluene, extractable hydrocarbons (TEH) and mineral

oil and grease

(MOG). Disposal may be dependent upon whether or not it meets regulatory

criteria for control as a hazardous waste. The intended recipient should be consulted prior to initiating disposal.

Safe Handling of Residues: See "Waste Disposal Methods". Disposal of Packaging: Empty containers retain product residue. Empty drums should be

completely drained, properly bunged and promptly returned to a drum reconditioner. Do not dispose of package until thoroughly washed out.

14.

TRANSPORTATION INFORMATION

CANADIAN TDG ACT / U.S. DOT CLASSIFICATION: Not regulated.

16.

REGULATORY INFORMATION

CANADA CEPA - NSNR: All constituents of this product are included on the DSL.

CEPA - NPRI: Aluminium Oxide. Controlled Products Regulations Classification (WHMIS): D-2B: Toxic

(Skin and Eye

Irritant).

USA Environmental Protection Act: All constituents of this product are included on the TSCA

inventory. OSHA Hazard Communication (29CFR 1910.1200) Classification: Skin and Eye Irritant.

HMIS: 1 Health, 0 Fire, 0 Reactivity. (3) INTERNATIONAL: Aluminium Oxide is found on the following inventories: EINECS

(European

Inventory of Existing Commercial Chemical Substances), ACOIN (Australia), MITI (Japan) and Korea.

18.

OTHER INFORMATION

ADDITIONAL INFORMATION AND SOURCES USED

  • 1.

    RTECS-Registry of Toxic Effects of Chemical Substances, Canadian Centre for Occupational Health and Safety RTECS database.

  • 2.

    Clayton, G.D. and Clayton, F.E., Eds., Patty's Industrial Hygiene and Toxicology, 3rd ed., Vol. IIA,B,C, John Wiley and Sons, New York, 1981.

  • 3.

    Supplier's Material Safety Data Sheet(s).

  • 4.

    "CHEMINFO", through "CCINFOdisc", Canadian Centre for Occupational Health and Safety, Hamilton, Ontario, Canada.

  • 5.

    Guide to Occupational Exposure Values, 2005, American Conference of Governmental Industrial Hygienists, Cincinnati, 2005.

Document info
Document views32
Page views33
Page last viewedTue Dec 06 14:59:20 UTC 2016
Pages8
Paragraphs296
Words3372

Comments