Design Tools and Rapid Prototyping (B104)
8:00 a.m. - 8:40 a.m.
Hardware-in-the-Loop Technology for Embedded Software Development and Testing (AE108)
Intelligent Vehicle Initiative (IVI) Technology Advanced Controls and Navigation Systems (AE309)
System Level Architecture Design Tools and Methods (AE318)
Advanced powertrain, chassis, vehicle dynamics and body systems electronic controls testing are complex undertakings in new vehicle development. hILs play an important role in facilitating invention as well as validation of the algorithm, communication and diagnostic code prior to release. This session will highlight advances in process, tools, and technology being applied to reduce design and validation time and cost, and to improve the quality of embedded software.
This session presents papers by leading experts in the field of Intelligent Vehicle Technologies, such as: vehicle communications and networks, driver drowsiness and driving pattern detection, sensors and GPS, vehicle and chassis control and autonomous vehicles, route prediction, head-up displays and power transmission for electric vehicles.
This session focuses on methods and design tools for the exploration, analysis, synthesis, and optimization of E/E automotive architectures. These methods and tools are usually model-based as they are applied in the early phases (left-hand side of the V-Cycle) of the development process. These methods and tools assist designers in deciding and configuring the communication network topology, the allocation of functions to ECU’s, and the IO allocation strategies.
8:00 a.m. - 11:00 a.m.
8:00 a.m. - 11:40 a.m.
8:00 a.m. - 11:40 p.m.
WEDNESDA , APRIL 13 - MORNING Technical and Business Sessions
SESSION TITLE, DESCRIPTION, AND ROOM
Organizers: Randy Gu, Oakland Univ.; Yu J. Teng, Chrysler Group LLC
Chairpersons: Yu J. Teng, Chrysler Group LLC
Organizers: Kevin Kott, Vivek Moudgal, dSPACE Inc.; Peter Waeltermann, dSPACE Gmbh
Organizers: John Wesley Phillips, Jeffery W. Sankey, Transportation Research Center Inc.; Kenneth Webster, Transportation Research Center Inc
Chairpersons: Kenneth Webster, Transportation Research Center Inc
Organizers: Paolo Giusto, GM; Amit Choudhury, Renesas Electronics America Inc
Chairpersons: Amit Choudhury, Renesas Electronics America Inc; Paolo Giusto, General Motors LLC
hybrid Drivetrain Simulation for hardware- in-the-Loop Applications
A Method for Testing GPS in Obstructed Environments Where GPS/INS Reference Systems Can Be Ineffective
Efficient Reliability and Safety Analysis for Mixed-Criticality Embedded Systems
Tino Schulze, Thomas Schulte, Joerg Sauer, dSPACE Gmbh
Zeljko Popovic, Yutaka Mochizuki, honda R&D Americas Inc.
Maurice Sebastian, Philip Axer, Rolf Ernst, Technische Universität Braunschweig; Nico Feiertag, Marek Jersak, Symtavision Gmbh
Securing the Path for Camera Systems by Visual Loop Testing
Performance of Aftermarket (DSRC) Antennas Inside a Passenger Vehicle
An Integrated Timing Analysis Methodology for Real-Time Systems
(2011-01-0451) Florian Schmidt, MBtech Group
Radovan Miucic, Sue Bai, honda R&D Americas Inc.
Daniel Kästner, AbsInt Angewandte Informatik Gmbh; Marek Jersak, Symtavision Gmbh; Christian Ferdinand, AbsInt Angewandte Informatik Gmbh; Peter Gliwa, Gliwa Gmbh; Reinhold heckmann, AbsInt Angewandte Informatik Gmbh
Advancements in hardware-In-the-Loop Technology in support of complex integration testing of Embedded System Software
On the Impact of Early Warning Collision Avoidance Information through Prototype head-Up Display for Older Drivers
An AUTOSAR-Compliant Automotive Platform for Meeting Reliability and Timing Constraints
Andreas himmler, Peter Waeltermann, dSPACE Gmbh; Mina Khoee-Fard, General Motors LLC
Vassilios Charisis, Glasgow Caledonian Univ.; George Vlachos, Universtiy of Strathclyde; Sachi Arafat PhD, Univ. of Glasgow
Junsung Kim, Gaurav Bhatia, Ragunathan (Raj) Rajkumar, Carnegie Mellon Univ.; Markus Jochim, General Motors Research
Challenges in Real Time Controls Simulation (hardware-In-the-Loop) in Active Safety for Subsystem Level Software Verification
Navigation Control in an Urban Autonomous Ground Vehicle
AUTOSAR Extensions for Predictable Task Synchronization in Multi-Core ECUs
Mina Khoee-Fard, Tarek Lahdhiri, General Motors Company
Bapiraju Surampudi, Joe Steiber, Southwest Research Institute
Karthik Singaram Lakshmanan, Gaurav Bhatia, Ragunathan Rajkumar, Carnegie Mellon University
A Study on Prediction Model Based on Support Vector Regression for Green Technology Automotive Form Design (Written Only -- No Oral Presentation)
Technical Keynote: Evolution of Testing Technology and Impact on hardware-In- the-Loop Applications
Implementation of Low Cost Inertial Measurement Unit (IMU) Integrated with a Global Positioning System (GPS) Receiver- A Study
Technical Keynote: From heterogeneous models to code : Challenges in the development of modern real time automotive software
(Oral Only) Mina Khoee-Fard, General Motors LLC
(Oral Only) Marco Di Natale, Scuola Superiore S. Anna
Chun-hui Chiu, Southern Taiwan Univ.; Natl Yunlin Univ. of Science & Tech.; Kuo- Kuang Fan, National Yunlin University of Science and Technology; Chih-Chieh Yang, Southern Taiwan Univ.
Saurav Talukdar, IIT Bombay; Muhammad Adeel Awan, Dr. Amer hameed, Cranfield Defence & Security
Continued on next page
SAE 2011 World Congress
Predicting Fitting Quality of Mechanical Assemblies through Fuzzy-Based Process Capability Analysis (Written Only -- No Oral Presentation)
Mohammad R. Movahhedy, Saeed khodaygan, Sharif University of Technology
Design of Neural Networks Model for Kinematic Analysis of a Modified Slider- Crank Mechanism of Car Engines
�ahin Yildirim, Selçuk Erkaya, �brahim Uzmay, University of Erciyes; Menderes Kalkat, University of Nigde
Multi-Sensor System for Vehicle Positioning in Dense Urban Areas
Zeljko Popovic, honda R&D Americas Inc.; Andrey Soloviev, University of Florida; Yutaka Mochizuki, honda R&D Americas Inc.