X hits on this document

PDF document

WEDNESDA , APRIL 13 - MORNING Technical and Business Sessions - page 29 / 100

403 views

0 shares

0 downloads

0 comments

29 / 100

THURSDA , APRIL 14 - AFTERNOON Technical and Business Sessions

TIME

SESSION TITLE, DESCRIPTION, AND ROOM

O2-33

O2-43

O2-44

W2-61

Advanced Catalysts and Substrates (PFL400)

Diesel Exhaust Emission Control:

Diesel Exhaust Emission Control:

Modeling (Part 2 of 2) (PFL407)

SCR (Part 3 of 3) (PFL405)

Energy Efficiency of Thermal Systems (HX103)

This session focuses on the systems engineering experience required to achieve ultra-low emission levels on light-duty vehicles. Emission system component topics discussed in this session include the development of advanced three- way catalysts, the development of NOx control strategies for gasoline lean burn engines, the application of high cell density substrates to advanced emission systems, and the integration of these components into full vehicle emission systems.

This session is focused on diesel engine exhaust aftertreatment system models as well as their validation and application. Technologies covered include DOC, DPF, LNT, SCR, and hybrid or combined catalysts. Modeling aspects range from fundamental, 3D models of individual components to system level simulation, optimization, and control.

This session covers the Selective Catalytic Reduction (SCR) process, in which Diesel Exhaust Fluid (DEF) is injected to create ammonia which reacts with NOx and converts it into harmless Nitrogen. SCR is a very promising NOx reduction technology. The papers in this session cover various aspects of SCR technology such as different washcoats, two-way (SCR

washcoat on DPF substrate), aging and poisoning impact on catalyst performance, importance of urea injection and mixing and SCR modeling.

Proper thermal management can significantly contribute to overall system energy efficiency. This session highlights the latest developments in thermal management energy efficiency.

1:00 p.m. - 2:40 p.m.

1:00 p.m. - 3:40 p.m.

1:00 p.m. - 2:40 p.m.

1:00 p.m. - 4:00 p.m.

Organizers: Douglas Ball, Umicore Autocat USA Inc.; Rasto Brezny, Manufacturers of Emission Controls Assoc.; Ronald M. heck, RMh Consulting; Joseph E. Kubsh, Manufacturers of Emission Controls Assoc.

Organizers: Maruthi Devarakonda, Pacific Northwest National Laboratory; Colin P. Garner, Loughborough Univ.; Thomas McKinley, Cummins Inc.; Vincenzo Mulone, Univ. di Roma Tor Vergata; Cornelius Opris, Caterpillar Inc.

Organizers: Brad Adelman, Navistar; Danan Dou, John Deere Product Engineering Center; Magdi Khair, Southwest Research Institute; Rahul Mital, GM; Minyong Zhou, Exova

Organizers: Ronald Semel, BAE Systems; Gursaran D. Mathur, CalsonicKansei North America Inc.; Ramesh Kumar Goyal

3:20 p.m.

A Three-Parameter Transient 1D Catalyst Model

Thermal Management System for Electric Vehicle

(2011-01-1306)

(2011-01-1336)

Karin Fröjd, LOGE AB; Fabian Mauss, BTU Cottbus

Atsushi Yokoyama, hitachi; Tadashi Osaka; Yuto Imanishi; Sachio sekiya

3:40 p.m.

Efficient Thermally Responsive Coolant Output and Flow Control for Conventional and Advanced Propulsion Systems

(Oral Only) John Fulton, FloWork Systems LLC

10:01 p.m.

Development of a Neural Network Model of an SCR Catalytic Converter and Ammonia Dosing Optimization Using Multi Objective Genetic Algorithm (Written Only -- No Oral Presentation)

(2011-01-1332)

Ehsan Majd Faghihi, Amir h. Shamekhi, K N Toosi Univ. of Technology

Planned by Exhaust Aftertreatment and Emissions Committee / Powertrain Fuels and Lubricants Activity

Planned by Exhaust Aftertreatment and Emissions Committee / Powertrain Fuels and Lubricants Activity

Planned by Exhaust Aftertreatment and Emissions Committee / Powertrain Fuels and Lubricants Activity

Planned by Thermal Management Activity / EMB Land and Sea Group

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00164, and also individually. To purchase visit collections.sae.org

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00163, and also individually. To purchase visit collections.sae.org

DON’T FORGET TO VOTE! Best of the Best Booth Awards Kiosks located in the front of Oakland Hall

New this year, the Best of the Best Booth Awards recognize exhibitors with the most innovative technology. Please vote for the most innovative exhibitor in each of the following categories:

  • Poster Display

  • 10x10 Booth

  • 10x20 Booth

  • 20x20 Booth

  • Most Innovative Booth Overall

Voting will close at 12:00 pm on Thursday, April 14th, so be sure to visit the voting kiosks in the front of Oakland Hall before that time.

Best of the Best Award winners will be recognized during the World Congress Annual Banquet.

SAE 2011 World Congress

77

emissions/environment/sustainability

Document info
Document views403
Page views403
Page last viewedSun Dec 04 08:52:19 UTC 2016
Pages100
Paragraphs7750
Words67338

Comments