X hits on this document

PDF document

WEDNESDA , APRIL 13 - MORNING Technical and Business Sessions - page 37 / 100

433 views

0 shares

0 downloads

0 comments

37 / 100

Reliability and Robust Design in Automotive Engineering: Assessment of Reliability and Robustness and Reliability Applications (IDM102)

Virtual Design and Engineering (Part 1 of 2) (IDM301)

Reliability and Robust Design in Automotive Engineering: Decision Under Uncertainty/Uncertainty Modeling (IDM105)

This session presents methods and automotive applications on how to assess reliability and robustness in product development. Topics include among others, system reliability target allocation, interval analysis in robust design and imprecise reliability assessment.

This technical session will showcase the creation and application of various tools that will allow for the design and manufacture of parts, equipment, facilities and tests that eliminate the need for physical part prototyping early in a program. The ability to model variouls aspects of design, test and manufacturing allows for more accurate, cost effective and faster development and product delivery to market.

Methods for modeling uncertainty and decision making under uncertainty are presented in this session. Both theoretical developments and practical applications from the automotive industry are covered.

8:00 a.m. - 9:40 a.m.

8:00 a.m. - 10:40 a.m.

10:00 a.m. - 11:40 a.m.

TIME

D0-06B

D0-06B

WEDNESDA , APRIL 13 - MORNING Technical and Business Sessions

SESSION TITLE, DESCRIPTION, AND ROOM D0-07A

Organizers: Efstratios Nikolaidis, Univ. of Toledo; Zissimos Mourelatos, Oakland Univ.; Ramesh Rebba, GENERAL MOTORS CORP; Richard Sun, Sadek S. Rahman, Chrysler Group LLC

Organizers: Paul Zalucha, BAE Systems; George Smith, McLaren Performance Technologies

Chairpersons: Paul Zalucha, BAE Systems

Organizers: Zissimos Mourelatos, Oakland Univ.; Efstratios Nikolaidis, Univ. of Toledo; Ramesh Rebba, General Motors LLC; Ren- Jye Yang, Ford Motor Company; Vijitashwa Pandey, Oakland University

Chairpersons: Efstratios Nikolaidis, Univ of Toledo; Zissimos Mourelatos, Oakland Univ

Chairpersons: Vijitashwa Pandey, Oakland University; Ramesh Rebba, General Motors LLC

Moderators: Zissimos Mourelatos, Oakland Univ

10:20 a.m.

10:40 a.m.

A co-simulation framework for full vehicle analysis.

A Simulation and Optimization Methodology for Reliability of Vehicle Fleets

(2011-01-0516)

(2011-01-0725)

Makarand Datar, University of Wisconsin- Madison; Ilinca Stanciulescu, Rice University; Dan Negrut, University of Wisconsin-Madison

Zissimos Mourelatos, Jing Li, Vijitashwa Pandey, Oakland Univ.; Amandeep Singh, Matthew Castanier, David A. Lamb, US Army TARDEC

Fuzzy Boundary Element Method with Uncertain Shear Modulus in Linear Plane Strain Elasticity

(2011-01-0729) Bart Zalewski, ZIN Technologies

11:00 a.m.

Advanced Reliability Prediction for hMMWV Suspension System

(2011-01-0726)

Dan Ghiocel, GP Technologies Inc.; Dan Negrut, Univ. of Wisconsin; David A. Lamb, US Army TARDEC; David Gorsich, US Army RDECOM

11:20 a.m.

Multi-Criteria Decision Analysis of heuristically Designed Light-Duty Vehicles Today and in 2035

(2011-01-0727)

Erik Wilhelm; Alexander Wokaun, Paul Scherrer Institut

10:01 p.m.

Statistical Experimentation of Fuel System O-Ring Interface (Written Only -- No Oral Presentation)

Interval Optimization of Uncertain Suspension Kinematics Characteristic Parameters (Written Only -- No Oral Presentation)

(2011-01-0514) Edward John Vinarcik

(2011-01-0730)

Kai Ma, College of Mechanical ,Jilin University; Shuyi pang, State Key ADSL Lab, Jilin University

10:02 p.m.

An Improved Finite Element-Based Model for Reliability Assessment of a Profile-Type Automotive Body Experiencing Uncertain Loading Conditions and Material Properties (Written Only -- No Oral Presentation)

(2011-01-0731)

M. Shariyat, Professor, K.N. Toosi University of Tech; Mahboobeh Rajabi Ghahnavieh, Corresponding author, M. SC., K.N. Toosi

Planned by Quality, Reliability and Robust Design Committee / Integrated Design and Manufacturing Activity

Planned by E-Design and Manufacturing Committee / Integrated Design and Manufacturing Activity

Planned by Quality, Reliability and Robust Design Committee / Integrated Design and Manufacturing Activity

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00141, and also individually. To purchase visit collections.sae.org

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00142, and also individually. To purchase visit collections.sae.org

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00141, and also individually. To purchase visit collections.sae.org

SAE 2011 World Congress

85

integrated design & manuFacturing

Document info
Document views433
Page views433
Page last viewedWed Dec 07 18:50:12 UTC 2016
Pages100
Paragraphs7750
Words67338

Comments