X hits on this document

PDF document

WEDNESDA , APRIL 13 - MORNING Technical and Business Sessions - page 53 / 100

448 views

0 shares

0 downloads

0 comments

53 / 100

and Structures for Enhanced Automotive Safety and Weight Reduction (Part 1 of 2) (M103)

(M302)

Papers with an emphasis on, but not limited to, innovative ideas to enhance automotive safety with improved material constitutive modeling, analysis methods, simulation and pre/post processing tools, optimization techniques, finite element model updating, model validation and verification techniques, restraint systems, as well as lightweight material applications and designs are highly encouraged.

This session will cover a very broad range of applications, processes and technologies as the title suggests. Please refer to the Session Schedule for M302 to get a list of specific papers / presentations contained in this session (session code: M302).

This session contains papers which describe the use of modern automotive composites in structural applications. Design, process, and analytical presentations are included, as well as papers presenting results of bonding strategies and techniques. Engineers involved in the design and use of advanced composites will find this session of particular value.

The focus of this session are the tests and test methods employed in the evaluation of the performance and durability of powertrain (engines, transmissions), driveline (4WD systems, driveshafts, axles), chassis (frame, suspensions, brakes, etc.) and body components, subsystems, and full vehicle systems.

1:00 p.m. - 4:20 p.m.

1:00 p.m. - 2:20 p.m.

1:00 p.m. - 4:00 p.m.

1:00 p.m. - 3:00 p.m.

TIME

TUESDA , APRIL 12 - AFTERNOON Technical and Business Sessions

SESSION TITLE, DESCRIPTION, AND ROOM

D0-04C

Automotive Engineering Testing and Test Methods (M104)

Optimization of Materials, Restraints, Processes and Technologies

D0-03D Automotive Composites (M306)

D0-04B Advanced Analysis, Design, and

D0-07B Advances in Plastic Components,

Organizers: Edwin Goyzueta, Akron Rubber Development Laboratory Inc.; Robert Maynard, EMS-Grivory America; Y Charles Lu, Univ of Kentucky

Organizers: Nishkamraj Umakant Deshpande, Dura Automotive Systems Inc.; Y Charles Lu, Univ. of Kentucky; Srikanth Pilla, Suganit Systems; Richard D. Tonda, SEA Limited; Enamul haque, Bostik Inc

Chairpersons: Edwin Goyzueta, Akron Rubber Development Laboratory Inc; Robert Maynard, EMS-Grivory America

Chairpersons: Nishkamraj Deshpande, DURA AUTOMOTIVE SYSTEMS IN; Enamul haque, Bostik Inc.; Y Charles Lu, Univ. of Kentucky; Srikanth Pilla, Suganit Systems; Richard Tonda, SEA Limited

Organizers: William J. Altenhof, Univ. of Windsor; Sheng-Dong Liu, Generalety LLC; Jwo Pan, Univ. of Michigan-Ann Arbor; Tau Tyan, Ford Motor Co.; Guofei Chen, United States Steel Corporation; Wei Li, First Technology Safety Systems Inc

Chairpersons: William J. Altenhof, Univ. of Windsor; Guofei Chen, United States Steel Corporation; Wei Li, General Motors LLC; Sheng-Dong Liu, Generalety LLC; Jwo Pan, Univ. of Michigan- Ann Arbor; Tau Tyan, Ford Motor Co.

Organizers: Darryl S. Taylor, Boeing; Mike Temkin, Chrysler Corp.

Chairpersons: Mike Temkin, Chrysler Corp; Darryl Taylor, Boeing

3:20 p.m.

Repairable Component Design for Repair Cost Saving in a Low Speed Crash

VOC-Free, Cross-Linkable Acrylic Copolymers Offer New Opportunities for Eco-Friendly Automotive Composites

(2011-01-0008)

(2011-01-0220)

Sunghyun Kim, hyungil Kim, Dongseok Kim, Youngjn Cho, GMDAT Safety Integration team

Andre Bendo, Gero Nordmann PhD, John Norton, Jeremy Funk, Michael Kalbe, Bernd Reck, Matthias Gerst, BASF Corp.

3:40 p.m.

Development of Automobile Bumper Beam Using hybrid Process

The Utilization of Flax Fiber a a Reinforcement in Polypropylene Compounds

(2011-01-0006)

(Oral Only)

Joung Myung Lim, Dong-Won Shin, heean cho, hanwha L&C; Myeong Ki Kim, hyundai-Mobis

James Preston, Andrew hopkins, harutun G. Karian, Rhetech Inc.

Determination of Molding Parameter Effects on the Physical Properties of a Carbon Powder Filled, Impact Modified Acetal Copolymer (Written Only -- No Oral Presentation)

Development and Wear Behavior of Al/ Al2SiO5/C Chilled hybrid Metal Matrix Composites by Both Experimental and Finite Element Modeling (Written Only -- No Oral Presentation)

(2011-01-0250)

(2011-01-0223)

Richard A. Novaco, Brian Bartnick, William R. Rodgers, Mitchell Everett hart, Benjamin Christian, Thomas R. Paveglio, General Motors Company

Joel hemanth, Rajiv Gandhi Institute of Technology

4:00 p.m.

10:01 p.m.

Virtual Development Process of the Integrated Safety System for the Frontal Crash

(2011-01-0021)

Jeong Keun Lee, Kang Wook Lee, Byung Jae Ahn, hyundai Mobis

10:02 p.m.

Design of a Lightweight Composite Rear Bumper System for Meeting Low Speed Impact Requirements (Written Only -- No Oral Presentation)

(2011-01-0222)

Adam Koziel, John(Dongwon) Shin, hanwha L&C Corp.; Byungkyu Yoon, hyundai Motor Co & KIA Motors Corp; heean cho, Nam hyeong Kim, hanwha L&C Corp.

10:03 p.m.

Jute Fibre Based Composite for Automotive headlining (Written Only -- No Oral Presentation)

(2011-01-0224) Asmita Sathaye, Tata Motors, Ltd.

Planned by Materials Modeling and Testing Committee / Materials Engineering Activity

Planned by Polymers and Coatings Committee / Materials Engineering Activity

Planned by Polymers and Coatings Committee / Materials Engineering Activity

Planned by Materials Modeling and Testing Committee / Materials Engineering Activity

The papers in this session are available in SAE Technical Paper Collection, COLL-TP-00143, and also individually. To purchase visit collections.sae.org

SAE 2011 World Congress

101

materials

Document info
Document views448
Page views448
Page last viewedFri Dec 09 04:09:13 UTC 2016
Pages100
Paragraphs7750
Words67338

Comments