X hits on this document

PDF document

WEDNESDA , APRIL 13 - MORNING Technical and Business Sessions - page 64 / 100





64 / 100


THURSDA , APRIL 14 - MORNING Technical and Business Sessions



D0-07B Casting Materials (M402)

D0-02A Load Simulation and Analysis

in Automotive Engineering: Influence of Load on Vehicle Handling/Traction/Braking Dynamics and its Control (Part 5 of 5)Session 1 (M501)

This session address casting applications and technology. A keynote address by Prof. Druschitz followed by presentations from world-renowned experts on advanced materials like Austempered Ductile Iron, high temperature and innovative cast materials for use in critical automotive applications will conclude this session.

Focusing on analysis and enhancement of vehicle handling dynamics, braking/traction performance and active stability under the influence of loading and tire force: system modeling/simulation, testing and optimization; correlations of simulation results, objective measurements and subjective judgments of load impacts on vehicle dynamics characteristics; vehicle/chassis control systems; impact of system hybridization/ electrification on vehicle dynamics/control.

8:00 a.m. - 11:20 a.m.

8:00 a.m. - 11:00 a.m.


Applications of Advanced High- Strength Steels for Automotive Structures (Part 1 of 2) (M205)

This symposium provides a forum for researchers and application engineers to disseminate the knowledge and information gained in the area of advanced high- strength steel development and applications in automotive structures, enabling light- weight and durable vehicles with improved safety.

8:00 a.m. - 10:20 a.m.


Optical Measurement and Nondestructive Testing Techniques in Automotive Engineering (M107)

Papers are invited on various aspects of developments and applications of optical measurement and nondestructive testing techniques in automotive engineering. Topics include shape and dimension gauging of components and full vehicle bodies, stress and strain analysis, applications to NVh, nondestructive testing and quality inspection, design verification and optimization, manufacturing tool for quality improvement and cost reduction, etc.

8:00 a.m. - 11:20 a.m.

Organizers: Kathryn M. Doherty, American Foundry Society Inc.; Alan Druschitz, Virginia Tech University; Thomas Prucha, Steve Robison, American Foundry Society Inc.

Organizers: Dongpu Cao, Univ. of Waterloo; Ken Kang, honda R&D Americas Inc.; Xiaobo Yang, Oshkosh Corporation; Paramsothy Jayakumar, TARDEC; Peijun Xu, Ebco Inc.

Organizers: Kah Wah Long, Chrysler Group LLC; Mohammed Omar, Clemson Univ.; Lianxiang Yang, Oakland Univ.

Chairpersons: Frank Goodwin, International Zinc Association; Thomas Prucha, American Foundry Society Inc

Chairpersons: Ken Kang, honda R&D Americas Inc; Dongpu Cao, Univ of Waterloo

Chairpersons: Kah Wah Long, Chrysler Group LLC; Mohammed Omar, Clemson Univ.; Lianxiang Yang, Oakland Univ.

Organizers: Jason Coryell, GENERAL MOTORS CORP; hong Tae Kang, Univ. of Michigan- Dearborn; James Dykeman, honda R&D Americas Inc.; Raj Sohmshetty, Ford Motor Co.; Raj Mohan Iyengar, US Nuclear Regulatory Commission; Constantin Chiriac, United States Steel Corp.

Chairpersons: Jason Coryell, GENERAL MOTORS CORP; Constantin Chiriac, United States Steel Corp; James Dykeman, honda R&D Americas Inc

8:00 a.m.

8:20 a.m.

Technical Keynote: Evolution of Steel Technology to Satisfy Automotive Materials Challenges

(Oral Only)

Ronald P. Krupitzer, American Iron and Steel Institute

Zinc Die Castings for Automotive Applications

(2011-01-1087) Martin Gagné, Xstrata Zinc Canada

Improving the Relationship between Processing and Properties of Zinc Die Casting: Developments in Creep and Ageing Correlations

Technical Keynote: Application of Multi- Body Simulation Methods in Development of Vehicle Ride, handling, and Steering Performance

Technical Keynote: State-of-Art of Moiré Method and Applications to Shape, Displacement and Strain Measurement

(Oral Only) Max Farhad, General Motors Company

(Oral Only)

Yoshiharu Morimoto, Moire Institute Inc.; Motoharu Fujigaki, Akihiro Masaya, Wakayama University


Frank E. Goodwin, International Zinc Assn.; Lothar Kallien, Aalen University of Applied Sciences

Bake hardening Behavior of Advanced high Strength Steels under Manufacturing Conditions

EZAC™ - A Novel high Strength, Creep Resistant, hot Chamber Zinc Die Casting Alloy

Electronic Stability Control of a Narrow Tilting Vehicle

A Study of Anisotropy and Post-Necking Local Fracture Strain of Advanced high Strength Steel with the Utilization of Digital Image Correlation


(2011-01-1084) Ryan Winter, Eastern Alloys, Inc.



heike Kantereit, Development Engineering International

Johannes Edelmann, Manfred Plöchl, Vienna University of Technology

Juan D. Tobon, Johns hopkins University; Claire Silverstein, The George Washington University; Juan Rueda, Texas Christian University; Laila Guessous, Lianxiang Yang, Oakland Univ.

Properties of a Newly Developed Galvanneald Steel Sheet with Modified Surface

A New high Fluidity Zinc Die Cast Alloy

Saturation Balancing Control for Enhancing Dynamic Stability of Vehicles with Independent Wheel Drives

high-Speed Applications of Digital Image Correlation and the need for Standards and Traceability in Industry


(2011-01-1086) Keith Zhang, Artur Filc, Teck Metals Ltd


(Oral Only) Matt J. Crompton, Dantec Dynamics

Katsuya hoshino, Shoichiro Taira, Naoto Yoshimi, Yuji Yamasaki, Kazuhiko higai, Masayasu Nagoshi, Yoshiharu Sugimoto, JFE Steel Corp.

Justin h. Sill, Beshahwired Ayalew, Clemson Univ.

Investigation on Dynamic Recovery Behavior of Boron Steel 22MnB5 under Austenite State at Elevated Temperatures

Corrosion Performance of “Green” Finishes on Zinc Die Castings

Investigating and Improving Vehicle Transient handling Behavior

Measurement of Strain Distribution for hole Expansion with 3D-Digital Image Correlation System


(2011-01-1085) Douglas Rourke, International Zinc Assn.



Junying Min PhD, Jianping Lin, Tongji University

Xuting Wu, Max Farhad, Jason Wong, General Motors Company

Xu Chen, Oakland University; Lianxiang Yang, Oakland Univ; Xiaoming Chen, Constantin Chirac, US Steel; Changqing Du, Dajun Zhou, Chrysler Group, LLC

Comparisons of Current Concepts for Press hardened Steel Tailor Welded Blanks and Tailor Rolled Blanks on Center Pillar Reinforcements

Recent Developments in Impact, Flexural and Fatigue Data for Zinc Die Casting Anti- Theft Applications

Driver’s Preview Strategy and its Impact on NATO Double Lane Change Maneuver

Shape and Strain Measurement of Rotating Tire by Sampling Moiré Method





Curt D. horvath, General Motors Company; Ronald Sanders, Adam Opel AG - General Motors Company

Frank E. Goodwin, International Zinc Association.; Martin Gagné, Xstrata Zinc Canada

Xiaobo Yang, Jesse Gander, Oshkosh Corporation

Yoshiharu Morimoto, Moire Institute Inc.; Motoharu Fujigaki, Akihiro Masaya, Kosuke Shimo, Wakayama University; Ryoji hanada, hideki Seto, The Yokohama Rubber Co., Ltd.

8:40 a.m.

9:00 a.m.

9:20 a.m.

9:40 a.m.


SAE 2011 World Congress

Document info
Document views560
Page views560
Page last viewedSun Jan 22 23:13:55 UTC 2017