X hits on this document

PDF document

DEVONSHIRE SINGLE DOOR CABINET INSTRUCTIONS - page 4 / 8

19 views

0 shares

0 downloads

0 comments

4 / 8

  • 5.

    Installing the Shelves.

  • 1.

    Push/twist the pins into place.

    • A.

      Push one side of the shelf into the left or right clips.

    • B.

      Snap the shelf down into the opposite side. If the shelf is too tight, repeat the process from the other side.

      • 2.

        Fill the remaining holes with the plugs.

6. Installing the Toothbrush Covers & Door Bumpers.

  • 1.

    Push the toothbrush covers into place, one up, one down, one up, one down.

  • 2.

    These covers can be “wiggled “ free to clean the bristle area when required.

  • 3.

    Each door can hold four brushes, 2 large bent handle type brushes (Reach®, Oral B®, Precision®, etc) 2 straight handle or childrens brushes

  • 4.

    Install the clear door bumpers in the round indent area at the top and bottom of the door.

Fig 7

Door Bumpers

Toothbrush Covers

Screw Caps ( SS341)S (SS341)W

#8 X 2” Hex Head Slotted Screws (SS343)

Top Clips (SS265)

Hole plugs (SS239) W

4 Side Kits Bracket Foam tape (SS329)

Toothbrush covers (SS262)W

Checklist • Care & Maintenance

  • 1.

    Cleaning

    • A.

      The cabinet door and interior are constructed of mirror and aluminum. Use only a damp cloth to clean. Spray the cloth, not the mirror when

cleaning. Mirrors are damaged by the use of ammonia or vinegar based cleaners. Rubbing alcohol can be used for stubborn stains.

  • B.

    Use no abrasive cleansers on any part of the cabinet.

  • C.

    The white frame should be cleaned with a damp cloth only.

Bag Part List – Devonshire Cabinet

#8 X 3/8 Side Kits Screws (SS344)

Snap-in Pins (SS131)

Door Bumpers (SS340)

#8 X 1 1/2” Phillips Head Screws (SS328)

209-1019 Devonshire Cabinet

7/02 cabfax#1015

Document info
Document views19
Page views19
Page last viewedThu Dec 08 15:03:44 UTC 2016
Pages8
Paragraphs316
Words3098

Comments