X hits on this document

PDF document

Content of Selected Publications to Thrust Areas: - page 12 / 12

26 views

0 shares

0 downloads

0 comments

12 / 12

O'Connor, J. T. (2000). "The I/A Implementation Index", Construction Industry Institute Annual Conference, Nashville, TN, Aug. 10.

O'Connor, J. T., Hadeed, S. P., Braden, K. E., and Deogaonkar, M. J. (2000). "Benchmarking the U.S. Industry's Use of Automation and Integration Technologies on Projects", the 17th International Symposium on Automation and Robotics in Construction, Taipei, Taiwan, September 18-20.

O'Connor, J. T., Kumashiro, M. E., Welch, K. A., Hadeed, S. P., Braden, K. E., and Deogaonkar, M. J. (2000). Project- and Phase-Level Technology Use Metrics for Capital Facility Projects, Report to the Center for Construction Industry Studies, Report No. 16, University of Texas at Austin, December.

O’Connor, J. T. and Dodd, S. C. (1999). “Achieving Integration on Capital Projects with Enterprise Resource Planning Systems,” Journal on Automation in Construction, International Association for Automation and Robotics in Construction, Fall.

O’Connor, J. T. and Dodd, S. C. (1999). “Achieving Integration on Capital Projects with Enterprise Resource Planning Systems,” 16th IAARC/IFA/IEEE International Symposium on Automation and Robotics in Construction, Sept. 22-24, Madrid, Spain, pp. 199-204.

O’Connor, J. T. Kumashiro, M. E., and Welch, K. A. (1999). “Measuring Automation and Integration in the Construction Industry,” 16th IAARC/IFA/IEEE International Symposium on Automation and Robotics in Construction, Sept. 22-24, Madrid, Spain, pp. 211-216.

Saidi, K., Haas, C., and Balli, N. (2002). “The Value of Handheld Computers in Construction,” 19th Annual ISARC, Gaithersburg, MD, Sept. 23-25.

Saidi, K.S., Seo, J., Sreenivasan, S.V., Haas, C.T., and Traver, A.E. (1999). "Design of a Tele-Operated Robot for the Maintenance of Boiler Hoppers in Electric Power Plants," ASME Journal of Mechanical Design, Vol. 121, pp. 647-649, Dec.

Seo, J., Haas, C., Saidi, K., and Sreenivasan, S.V. (2000). “Graphical Control Interface for Construction and Maintenance Equipment,” ASCE Journal of Construction Engineering and Management, Vol. 126, No. 3, pp. 210-218, May/June.

12

Document info
Document views26
Page views26
Page last viewedMon Dec 05 08:55:30 UTC 2016
Pages12
Paragraphs150
Words3960

Comments