X hits on this document

156 views

0 shares

0 downloads

0 comments

22 / 66

If you have a USB synchronization cable:

1. Insert one end of the AC adapter into the port on the bottom of the USB synchronization cable connector.

2. Connect the other end of the AC adapter to an electrical outlet.

3. Connect the USB synchronization cable to the charging/communications port on your HP iPAQ. The cable connector only fits one way, so do not force it. If the connector does not insert easily, turn it over.

If you have a USB synchronization cradle/charger:

  • 1.

    Connect one end of the AC adapter to the cradle.

  • 2.

    Connect the other end of the AC adapter to an electrical outlet.

3. With the front of the HP iPAQ facing the same direction as the front of the cradle, align the charging/communications port on the HP iPAQ with the connector in the cradle and slide the bottom of the HP iPAQ into the cradle.

IMPORTANT Whenever a replacement battery is inserted into your HP iPAQ, press and hold the Power button for at least two seconds or attach an AC adapter to turn on your device.

Step 4: Insert the Getting Started CD into your computer

Use the Getting Started CD to complete the setup of your HP iPAQ and to synchronize the HP iPAQ with your personal computer.

Insert the Getting Started CD into the CD drive of your personal computer. The HP Install Wizard automatically opens, and the application starts to run.

IMPORTANT Do you have administrative rights on your personal computer? If not, you may have problems installing the applications from the Getting Started CD. Your administrator will need to install the applications.

Step 5: Follow the on-screen instructions on your personal computer The HP Install Wizard installs:

Microsoft Outlook 2002 Microsoft ActiveSync Other optional software applications

12

Document info
Document views156
Page views156
Page last viewedSat Dec 03 05:28:10 UTC 2016
Pages66
Paragraphs1331
Words15869

Comments