X hits on this document

194 views

0 shares

0 downloads

0 comments

23 / 66

Microsoft ActiveSync

Connect your HP iPAQ when instructed. If you have a USB synchronization cable:

1. Connect the USB connector on the synchronization cable to a USB port on your personal computer.

2. Connect the USB synchronization cable to the charging/communications port on the bottom of your HP iPAQ. The connector only fits one way so do not force it. If the connector does not insert easily, turn it over.

If you have a USB synchronization cradle/charger:

1. Connect the USB connector on the cradle to a USB port on your personal computer.

2. With the front of the HP iPAQ facing the same direction as the front of the cradle, align the charging/communications port on the HP iPAQ with the connector in the cradle and slide the bottom of the HP iPAQ into the cradle.

When instructed, check the items you want to synchronize between your HP iPAQ and your personal computer. Do one or both of the following:

Select the check box for any items you want to synchronize. If you cannot select a check box, you may have to clear the check box for the same information type elsewhere in the list.

  • Clear the check box for any items you want to stop synchronizing.

To change available synchronization settings, select the type of information and tap Settings.

IMPORTANT Does your company use a Microsoft Exchange server? If not, during setup, uncheck the box marked Synchronize directly with a server running Microsoft Exchange Server. To do this now, you will need to have the server address and your logon credentials in order to sync to your personal computer.

After completing the ActiveSync installation, return to the HP Install Wizard for more software programs and additional product and setup information.

13

Document info
Document views194
Page views194
Page last viewedSat Dec 10 05:03:02 UTC 2016
Pages66
Paragraphs1331
Words15869

Comments