Step 6: Set up your HP iPAQ
When you turn on your HP iPAQ for the first time, you are provided instructions to help you set up your device. Use the stylus to enter information. The stylus is located on the right, back side of the device as you look at the screen. (See the Back Panel component illustration for the location of the stylus.)
Changing Your Password
Tap Start > Settings > Lock > Password tab.
Enter your current password.
In the Password box, enter your new password.
4. On the Hint tab, enter a phrase that helps you remember your password, but does not allow others to guess your password. The hint is displayed after the incorrect password is entered four consecutive times.
5. When prompted, tap OK.
For more details about passwords, refer to Additional Product Information located on the Getting Started CD.
Finding the Serial Number and Model Number
Locate the Serial and Model numbers before contacting HP Customer Support, particularly if you are calling for in-warranty support.
View the Serial Number and Model ID by tapping Start > HP Help And Support > Serial and Model Number.
You can also find this information underneath the battery of your HP iPAQ. To locate the Serial and Model Numbers:
Remove the battery cover.
Remove the battery from the unit.
Locate the label containing the Product ID and Serial Number underneath