X hits on this document

171 views

0 shares

0 downloads

0 comments

25 / 66

Resetting your HP iPAQ

You might need to perform a soft reset if your HP iPAQ stops responding. The two types of resets are soft and clean.

Performing a Soft Reset

A soft reset stops all running applications, but does not erase any programs or saved data.

NOTE Be sure to close all running applications before performing a soft reset.

To perform a soft reset: 1. Locate the recessed Reset button on the bottom of your HP iPAQ.

2. Use the stylus to lightly press the Reset button. The HP iPAQ restarts and displays the Today screen.

Performing a Clean Reset

A clean reset clears all user-installed settings, programs, and data, and restores your HP iPAQ to factory settings.

To perform a clean reset and return your HP iPAQ to factory settings: 1. Press and hold the Answer/Send, Power, and End Call buttons.

2. While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ until the device restarts.

3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button. The HP iPAQ restarts and powers on.

15

Document info
Document views171
Page views171
Page last viewedMon Dec 05 12:30:52 UTC 2016
Pages66
Paragraphs1331
Words15869

Comments