X hits on this document

153 views

0 shares

0 downloads

0 comments

60 / 66

Using MapQuest to Look Up a GPS-Tagged Image

Use HP Photosmart Mobile and MapQuest to “look up” the location of your tagged images. To “look up” your images:

  • 1.

    Connect to the Internet.

  • 2.

    Tap Start > Programs >Photosmart Mobile.

  • 3.

    In the Browse mode, select a tagged-GPS .jpg image.

  • 4.

    Tap Menu > Tools > Look up on Mapquest.

The location where the photo was taken appears on a map.

5. When you are finished viewing the map, tap

.

When .jpg thumbnail images are embedded with GPS information, the GPS icon appears on them. (Only .jpg images can be tagged with GPS information.)

Protecting the HP iPAQ Screen from Cracking or Damage

CAUTION The screen of your HP iPAQ is made of glass and can be damaged or broken by drops, impacts, or pressure. To reduce the risk of damage to the internal components, do not spray liquid directly on the screen, or allow excess liquid to drip inside your HP iPAQ. Using soap or other cleaning products on the screen might discolor the finish and damage it.

HP is not responsible for damage that occurs as a result of your failure to follow the instructions that came with the HP branded product. Refer to the warranty document included with your HP iPAQ for more information. You should observe the following practices to protect the screen of your HP iPAQ from damage:

Do not sit on your HP iPAQ.

When transporting your HP iPAQ in a purse, pocket, briefcase, etc., ensure the device does not get compressed, bent, dropped, or hit.

When not in use, close the flip cover on your HP iPAQ and store it in a case. You can select from a wide variety of case options at www.hp.com/accessories/ipaq or www.casesonline.com.

Do not place anything on top of your HP iPAQ. Do not bang your HP iPAQ against hard objects.

50

E

Document info
Document views153
Page views153
Page last viewedFri Dec 02 20:55:33 UTC 2016
Pages66
Paragraphs1331
Words15869

Comments