X hits on this document

138 views

0 shares

0 downloads

0 comments

22 / 48

22

Measurements and analysis with the VAS 5051

Multimeter

Display of measuring function

Display active connection U – voltage R – resistance D – continuity/diode

Test Instruments Multimeter

Voltage (U/R/D)

Freeze frame function, activation also possible using button on measuring lead

Freeze Frame

11.43 V

  • -

    20.00 Voltage (U/R/D)

Inline current

Resistance (U/R/D)

Continuity test (U/R/D)

Diode test

Current 50 A

Current 500 A

(U/R/D)

curr. pick-up

curr. pick-up

0

20.00

Minimum Maximum

Voltage DSO 1

Calibrate

Display of minimum and maxi- mum values during measurement

± 20 V

DSO

Buttons for selection of measuring function

Go to

Print

Help

202/022

Button for selection of measu- ring mode

  • -

    DC voltage

  • -

    AC voltage

Buttons for selection of measuring range setting

The display field for the measuring range is not selected in the above display, i.e. autoranging is activated in this case.

The selectable measuring functions in the mask "Multimeter" are divided into two function blocks:

  • Function block 1

(measurements using U/R/D measuring lead)

  • -

    Inline current

  • -

    Voltage

  • -

    Resistance

  • -

    Diode test

  • -

    Continuity test

  • Function block 2

(measurements using current pick-up, DSO 1)

  • -

    Current

  • -

    Current

50 A, current pick-up 500 A, current pick-up

  • -

    Voltage, DSO 1

Use of the test instruments is possible without previous identification of the vehicle.

Document info
Document views138
Page views138
Page last viewedFri Dec 09 08:38:02 UTC 2016
Pages48
Paragraphs1514
Words8658

Comments