X hits on this document

110 views

0 shares

0 downloads

0 comments

24 / 48

24

Measurements and analysis with the VAS 5051

Test Instruments Multimeter

12.7 V

Voltage

Resistance

Diode test

(U/R/D)

(U/R/D)

(U/R/D)

Inline

Continuity test

current

(U/R/D)

Voltage U/R/D Voltage DSO1

14.9 V

Current 50 A curr. pick-up

Current 500 A

Voltage

curr. pick-up

DSO1

Freeze frame

Calibrate

It is possible to simultaneously measure different voltages via the connections U/R/D and DSO 1, and to compare them on the display. The U/R/D voltage and the buttons for selection of the measuring range are located on the left. Everything on the right applies analogously to the DSO 1 connection.

20 V

40 V

DSO

Go to

Print

Help

202/054

Test Instruments Multimeter

Voltage

Resistance

(U/R/D)

(U/R/D)

  • -

    5.000

Inline

Continuity test

current

(U/R/D)

Current 50 A current pick-up

Freeze frame

0.239 A

Minimum Maximum

  • 0

    5.000

Diode test

Current 50 A

Current 500 A

Voltage

(U/R/D)

curr. pick-up

curr. pick-up

DSO 1

Calibrate

The current measurement is made using a current pick-up (current pick-up 50 A included in equip- ment package). The current following through the cable is measured when the pick-up is closed. Measurements are possible on wires with a diameter up to 20 mm.

±5A

DSO

Go to

Print

Help

202/068

Document info
Document views110
Page views110
Page last viewedFri Dec 02 19:06:23 UTC 2016
Pages48
Paragraphs1514
Words8658

Comments