The connections are located behind a cover panel. Only the connection for the mains cable is required for workshop operation. The other connections are required for servicing or repairs and for later extension of the tester's scope of functions.
An external monitor can be connected to the VGA interface.
PC card interface
The serial interface and the keyboard interface are only provided for servicing work on the tester.
The PC card interface is used for subsequent exten- sion of the tester, e. g. remote diagnosis.
Connection for the mains cable
No other interfaces may be used apart from the mains connection and the VGA interface. Faults resulting from the use of other interfaces lead to cancellation of the guarantee.
The CD-ROM drive is required to update the diag- nostic system. The tester loads the new program version from the CD-ROM onto the hard disk.
Be careful not to overwrite a newer program version, otherwise important data and functions could be lost.
The diskette drive is not required for workshop operation.
The infrared interface permits data transmission to the printer without wiring.