X hits on this document

47 views

0 shares

0 downloads

0 comments

5 / 24

How the FlashChrome Process Works

The FlashChrome process is completed in 3 easy steps and can be fully finished in 3 hours. No special equipment is needed and can be applied with any professional paint spray gun.

STEP 3: Apply at least two coats of the Clear Coat to protect the FlashChrome and provide an easy to clean surface.

No special equipment required.

Applicable with any professional paint spray gun.

STEP 1: After normal surface preparation, spray our Black Base Coat and allow to dry (with infrared 40 minutes; oven 1-1 ½ hour; air dry 24-48 hours). Upon drying, polish any dust nibs or runs before applying the FlashChrome.

STEP 2: Using either a professional spray gun or our recommended OPTIMA 650 LVLP Paint Spray Gun, “fog” the FlashChrome over the Black Base. Dry and ready to clear coat within 15 minutes.

Document info
Document views47
Page views47
Page last viewedSat Dec 03 00:53:19 UTC 2016
Pages24
Paragraphs307
Words2345

Comments