X hits on this document

PDF document

EPSON PRODUCT SUPPORT BULLETIN - page 24 / 28

76 views

0 shares

0 downloads

0 comments

24 / 28

Firmware Update Procedure: Download the file epson12939.exe for Windows users or epson12940.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer.

To verify the current firmware version on your viewer:

  • a)

    Power on the unit

  • b)

    Select Settings from the Home screen and press OK.

  • c)

    Select Device Information and use the 4 way ring to select the firmware version menu.

Press OK.

If you see earlier versions; such as the following versions:

      • 01.29.6838

        -0108-0200-0112

        • 01.30.7099.0108

          -0200-0112

      • 01.31.7104

        -0108-0200-0112

      • 01.57.7431

        -0110-0107-0112 then proceed to the next section.

Steps:

  • 1.

    Install a blank memory card into a memory card reader/writer and copy the “PSV5FIRM” folder (including all the files in the folder) to the root directory of the memory card.

  • 2.

    Verify that the battery is installed in the P-6000 or P-7000 viewer.

3. Connect the AC adapter to the viewer, but do not power it on.

4. After the firmware file has been copied to the memory card, insert the CompactFlash or

SD memory card into the viewer. 5. Press and hold down the “OK” and

keys while sliding the “POWER” switch as

shown below.

Page 3 of 4 PSB.2009.06.003

Document info
Document views76
Page views76
Page last viewedTue Dec 06 22:37:39 UTC 2016
Pages28
Paragraphs800
Words7493

Comments