X hits on this document

PDF document

EPSON PRODUCT SUPPORT BULLETIN - page 27 / 28

68 views

0 shares

0 downloads

0 comments

27 / 28

  • AC adapter – must be plugged in to a wall socket and connected to the viewer before

the firmware update can be performed

Firmware Update Procedure: Download the file epson12870.exe for Windows users or epson12871.dmg for Mac users from the Epson website (www.epson.com). Follow the on-screen instructions to download and extract the file onto your computer.

To verify the current firmware version on your viewer, power on the unit, select Settings from the Home screen and press OK. Then select Device Information and use the 4 way ring to select the Firmware Version menu. Press OK.

If you see an earlier version such as: 01.29.6838-0108-0107-0112 (P-6000) or 01.29.6838-0108-0107-0112 (P-7000) then proceed to the next section.

Steps:

  • 1.

    Install a blank memory card into a memory card reader/writer and copy the “PSV5FIRM” folder (including all the files in the folder) to the root directory of the memory card.

  • 2.

    Verify that the battery is installed in the P-6000 or P-7000 viewer.

3. Connect the AC adapter to the viewer, but do not power it on.

4. After the firmware file has been copied to the memory card, insert the CompactFlash or

SD memory card into the viewer. 5. Press and hold down the “OK” and

keys while sliding the “POWER” switch as

shown below.

W h e n y o u s e e t h e f i r m w a r e u p d a t e s c r e e n ( s e e r e f e r e n c e i m a g e b e l o w ) , r e l e a s e t h e keys. Note: If you do not see this screen, power off the unit and start the OK and

firmware process again.

Page 2 of 3

PSB.2009.01.001

Document info
Document views68
Page views68
Page last viewedMon Dec 05 04:01:45 UTC 2016
Pages28
Paragraphs800
Words7493

Comments