X hits on this document

69 views

0 shares

0 downloads

0 comments

10 / 21

To change the COM port click on the Settings button.  To download or transfer the application click on the Send button.  

Tip 4 – The first time you power up a Cimrex OI you will get a screen that has two selections Edit and Transfer.  Select Transfer to put the OI in the Transfer mode.  After this all you have to do is have the OI connected to the PC and click on the Send button.  The OI will automatically switch into transfer mode.  Note: a Comm Error will be displayed on the OI since it is no longer connected to the MMC.

17.

Connect the OI to the MMC and press the Enter key to restart the application.  The main block or screen should be displayed as follows on the Cimrex.

MMC-Cimrex Quick Start.doc

4/7/2003

Document info
Document views69
Page views77
Page last viewedThu Dec 08 00:38:36 UTC 2016
Pages21
Paragraphs381
Words6656

Comments