X hits on this document

76 views

0 shares

0 downloads

0 comments

6 / 21

8.

To download the ladder select, Compile-Bin File-Compile and Download.  The following window will come up.  

Check the Start the Scan box and click on OK to download.  After the ladder is downloaded the MMC is ready to respond to commands from the Cimrex.

9.

If you PC has only one COM port you will have to close PiCPro before running Cimrex Prog.

10.

Open up Cimrex Prog.

11.

NOTE:  Cimrex Prog 4.01 and higher will automatically install the G&L drivers. If you haven’t installed the MMC/PiC driver, refer to Appendix B - INSTALLING THE G&L DRIVER.  See we’re going to get you to read the readme.txt one way or another.

12.

Open the MMC1_C30 application under, File Open and browse to:

MMC-Cimrex Quick Start.doc

4/7/2003

Document info
Document views76
Page views84
Page last viewedSat Dec 10 21:25:34 UTC 2016
Pages21
Paragraphs381
Words6656

Comments