X hits on this document

92 views

0 shares

0 downloads

0 comments

26 / 31

Installation

Overview

All USACE standards, datasets and centralized workspaces are installed on a local area network storage device. There are no storage requirements for individual workstations or local hard drives, however workstations must have access to the LAN storage device and must be able to access this data via shortcuts. The Tri-Services configuration should not affect any current configurations and/or customization of Bentley applications since it resides separately in an external directory structure.

To install the Tri-Services standards, dataset and central workspace you will have to perform the following task:

  • Unzip the compressed file containing the workspace and the project files.

  • Identify a destination for the TS_Workspaces workspace on your server, this will require approximately

411MB.

  • Copy workspace contents to the server (under the Workspace_Drive folder).

  • Identify a destination for the Tri-Services projects on your server, the base template requires

approximately 100MB.

  • Copy project contents to the server (under the Project_Drive folder).

  • Modify the configuration files to correspond to your workspace and project destination.

  • Select Licensing method.

  • Create shortcuts (specific to your configuration).

  • Creating user(s).

  • Create Project(s).

  • Test

Server Installation

To install the Tri-Service standards, dataset and central workspace you will have to perform the following task:

Download the Workspace:

  • Download the workspace from the internet:

    • o

      https://cadbim.usace.army.mil/

      • o

        Under the Links ,Click the Software Downloads Folder and then the Dataset Folder

      • o

        Select the USACE Dataset ReadMe 07Q3 File Link

  • At end of the document is a link for download registration (Download Dataset).

  • Complete the registration information file.

Installing the Workspace:

  • Identify a destination for the TS_Workspace on your server; this will require approximately 411MB.

  • Move TS_Workspace to the server

  • The destination drive and directory you select will be referred to as the <workspace_destination>, When editing the configuration files use your actual drive and directory mapping in replace of this nomenclature. i.e. if you installed the TS_Workspace on H:\corps\ TS_Workspace, then your <workspace_destination> is H:\corps\

TriiServiices BIIM Standards, Datasets and Confiiguratiion for Bentlley Buiilldiing Applliicatiions Version 07Q3

Page 6 of 11

Document info
Document views92
Page views92
Page last viewedThu Dec 08 08:45:18 UTC 2016
Pages31
Paragraphs736
Words6491

Comments