X hits on this document

96 views

0 shares

0 downloads

0 comments

27 / 31

Installing the Project

  • Identify a destination for the Tri-Services projects on your server, the base template requires approximately 100MB choose a destination that has plenty of space to accommodate the bulk of the project files.

)Note: workspace and projects directory can either be on separate network drives or

be collocated on the same drive. For the default configuration, the Project Drive is labeled “P” and the Network Drive is labeled “N” in the installed Dataset shortcuts.

  • Copy project contents to the server. The Project directory contains a template project with a sample directory structure and a full version of the USACE BIM dataset. This template is required to successfully test your installation. To create your official USACE project, it is recommended that you make a copy of the template project a rename it to your assign project name.

  • The destination drive and directory you select for the Project_Drive will be referred to as the <project_destination>, When editing the configuration files use your actual drive and directory mapping in replace of this nomenclature. i.e. if you installed the Project_Drive on P:\Projects\, then your < project _destination> is P:\

Modify the configuration

Modification of the configuration files to correspond to your workspace and project destination can be done with a standard text editor such as notepad. Do not use a formatted text editor such as Word. There are three files that are required to be edited to connect the USACE configuration to the workspace and project destinations selected above.

E d i t i n g t h e U S A C E _ m s l o c a l . c f g :

Settings for MicroStation

Using Notepad open the file USACE_mslocal.cfg found in the following directory <workspace_destination>\TS_Workspaces\USACE_Dataset_07Q3\Program\MicroStation\config\

Set the USACE_Site variable to read as follows, substituting the <workspace_destination> for your actual drive and directory mappings

USACE Site =

_

<workspace_destination>/TS_Workspaces /USACE_Dataset_07Q3/ #Network

Location for Corporate Workspace

Note: UNC paths are also acceptable

i.e. USACE Site = _ \ \ < s e r v e r > / T S _ W o r k s p a c e s / U S A C E _ D a t a s e t _ 0 7 Q #Network Location for Corporate Workspace 3 /

E d i t i n g t h e U S A C E _ t f l o c a l . c f g :

Settings for Triforma

Using Notepad open the file USACE_tflocal.cfg found in the following directory <workspace_destination>\TS_Workspaces\USACE_Dataset_07Q3\Program\Triforma\config\

Set the USACE_Site variable to read as follows, substituting the <workspace_destination> for your actual drive and directory mappings

USACE Site =

_

<workspace_destination>/TS_Workspaces /USACE_Dataset_07Q3/ #Network

Location for Corporate Workspace

Note: UNC paths are also acceptable, but not recommended

i.e. USACE Site = _ \ \ < s e r v e r > / T S _ W o r k s p a c e s / U S A C E _ D a t a s e t _ 0 7 Q #Network Location for Corporate Workspace 3 /

E d i t i n g t h e U S A C E _ 0 1 _ S e r v e r . c f g :

Settings for projects

Using Notepad open the file USACE_01_Server.cfg found in the following directory <workspace_destination>\TS_Workspaces\USACE_Dataset_07Q3\ Workspace\Standards

Set the USACE_ProjectDir variable to read as follows, substituting the <project_destination> for your actual drive and directory mappings

U S A C E _ P r o j e c t D i r =

<project_destination>/Projects

TriiServiices BIIM Standards, Datasets and Confiiguratiion for Bentlley Buiilldiing Applliicatiions Version 07Q3

Page 7 of 11

Document info
Document views96
Page views96
Page last viewedFri Dec 09 14:05:10 UTC 2016
Pages31
Paragraphs736
Words6491

Comments