Revisions Made After Release
Date 2007-03-15 2007-08-30
Revision No. 001 002
Description Revise installation from compressed file. Update software version requirements.
Revision for version 07Q2, Change main folder designation to TS_WORKSPACES. Revise to make standards Tri-Services.
Revisions for 07Q3 version for XM.
New A/E/C 3.0 Standards plot driver: takes into account the colors set aside for screening by the A/E/C CAD Standard v3.0. It sets the screening as set in the Standards Table 3-4. Lineweights are set as in Table 3-1. The pen table corrects the problem with black lines placed before screened lines are hidden by the screening, by forcing black objects to the front. This pen table also does the text substitutions for the PW title block.
Because this driver is set to use the System Printer, it will be advantageous for the CAD Manager to set up Plot configurations (INI) for their system printers. That is why I am having the MS_PLOTINI variable redirected also. I tried to keep it as generic as possible. CAD Managers can further tweak it for their own networks.
Change to Project Folder names under the ConDocs Folder: Change ..\Models\ to ..\BIM_Models\ folder (to identify the BIM model files) Change ..\Sheets\ to ..\CAD_Sheets\ folder (to identify the BIM model files)
Create additional download with revised Icon paths for those who have installed the Bentley XM software to the folder “\Program Files\BentleyXM\”
WORKSPACE CHANGES: Folder/File change comparisons between the new release 07Q2 and the new release 07Q3 for MicroStation XM..
PROJECT DRIVE CHANGES: Project drive Folder/File change comparisons between the new release 07Q2 and the new release 07Q3 for MicroStation XM.
TriiServiices BIIM Standards, Datasets and Confiiguratiion for Bentlley Buiilldiing Applliicatiions Version 07Q3
Page 11 of 11