OTHER SURFACES: PLASTICS
Hammerite paint may be used on certain types of plastic such as drainpipes and guttering.
apply a suitable water based acrylic wood primer before applying Hammerite paint.
Abrade the painted surface to remove contaminants/gloss.
Wash down thoroughly with diluted detergent.
Rinse with clean water.
Allow to dry.
7.RECOMMENDED FILM THICKNESS
Minimum 100 microns wet.
Minimum 50 microns dry.
One coat will normally be sufficient although additional coats may be required when applying over contrasting colours.
Up to 14sq metres/litre for one coat at recommended dry film thickness (brushing).
Only one coat is required but when applying over contrasting colours a 2nd coat may be required in which case leave at least 4 hours between coats.
Minimum application temperatu Ideal application temperature: Maximum relative humidity:
3ºC above dew point 8-30ºC (46-86ºF) 85%
Technical Data Sheet Page 4
Issue date November 2007