Train arrives and stops at S 35.
S/A – 506 clear overlap of S 1 will
Setting the route for ‘RAJDHANI’
The procedure followed to set the route for RAJDHANI is same as that followed in the second condition.
Other important criteria’s
Trap 105 should be Open.
SH 5, SH 44, S16 should be ON.
Points 101-102 normal.
Points 111-112 normal
Simulation 4:(Continuation from third condition)
The goods train on the loop line has developed a loco failure. Hence arrangements
are made for a relief engine by TLC (Traction Loco Controller) BDTS (Bandra Terminus) loco shed.
which comes from
Conditions are same as for the Rajdhani case, only that the loco doesn’t cross S/A 506 (The Advance Starter).The loco stands at 39 AT. After this SH – 44(green button) and DGL (black button) are pressed together.
Thus the four conditions are established by the help of a visual display on a signal panel with the help of the monitoring system.