SOLID WASTE PROCESSING AND DISPOSAL
(Rule 1200-01-07-.11, continued)
pertinent to the design and operation of the facility. This narrative shall include, but not necessarily be limited to:
A description of how the facility will achieve the compliance of all standards defined in paragraphs (2), (3), (4), and (6) of this rule;
A description of the waste handling and processing equipment to be used;
A description of the management of run-on/runoff with design calculations of all
A description of the management of the leachate system and the disposition of the leachate;
A description of the odor control measures; and
A description of the procedures for the final closure of the facility.
Technological Standards / Best Available Technology In order to assure that the public health and environment of the State of Tennessee is
provided the optimum protection from unwarranted releases of metals, as restricted by rule 1200-01-07-.11(4) (a) 3, these rules shall require that any facility permit incorporate the best available technology. This requirement is restricted to facility processing standards and shall not be interpreted to include source management of the waste stream. The applicant shall submit to the Department documentation of the most technologically advanced system that is currently in operation and is compatible with the proposed design criteria. Representative product analysis shall be provided in accordance with the testing requirements of rule 1200- 01-07-.11(4)(c) “Testing” of this rule.
Authority: T.C.A. §§68-203-103(b)(3), 68-211-102(a), 68-211-105(b) and (c), 68-211-106(a)(1), 68-211- 107(a), 68-211-111(d)(1), 68-211-111(d)(2), 68-211-116, 68-211-851(a), 68-211-852, 68-211-853, and 68-211-861. Administrative History: Original rule filed October 8, 1998; effective December 28, 1998. Amendment filed April 17, 2000; effective July 1, 2000. Amendment filed July 27, 2001; effective October 10, 2001. Amendment filed September 29, 2003; effective December 13, 2003. Amendment filed May 23, 2006; effective August 6, 2006.
1200-01-07-.12 REQUIREMENTS FOR CERTIFICATION OF OPERATORS, ATTENDANTS, AND RESPONSIBLE PERSONS FOR SOLID WASTE LANDFILLS.
The purpose of this Rule is to establish procedures and requirements for training and certification of operators, attendants, and other responsible persons for municipal solid waste landfills. This rule will identify those persons who must receive certification and will impose fees for training and certification.
The training and certification requirements of this rule apply to operators, attendants, and responsible persons for Class I landfills. One certified operator is required to be on-site during the hours of operation. However, a certified operator is not required to be on-site during the post closure period.
May, 2010 (Revised)