X hits on this document

19 views

0 shares

0 downloads

0 comments

2 / 4

MS9540 VoyagerCG®

OPERATIONAL

Light Source Laser Power Depth of Scan Field Width of Scan Field Scan Speed Scan Pattern Minimum Bar Width Decode Capability

Visible Laser Diode 650 nm + 10 nm 0.96 mW (peak) 0 mm - 203 mm (0” - 8”) for 0.33 mm (13 mil) bar codes 64 mm (2.5”) @ face; 249 mm (9.8”) @ 203 mm (8.0”) 72 + 2 scan lines per second Single scan line 0.127 mm (5.0 mil)

Autodiscriminates all standard bar codes, including RSS; for other symbologies call Metrologic

System Interfaces

PC Keyboard Wedge, RS232, OCIA, Light Pen Emulation, Non-decode Emulation, IBM 468X/469X, Stand Alone Keyboard, USB (low speed and full speed)

Print Contrast Number Characters Read Roll, Pitch, Yaw Beeper Operation Indicators (LED)

35% minimum reflectance difference Up to 80 data characters 42°, 68°, 52° 7 tones or no beep

Green = laser on, ready to scan; yellow = auto trigger mode active; red = good read

MECHANICAL

Height Depth Width Weight Termination Cable

198 mm (7.8”) 40 mm (1.6”) Handle - 45 mm (1.8”); Head - 78 mm (3.1”) 149 g (5.25 oz) 10 pin modular RJ45 Standard 2.7 m (9’) coiled; optional 2.1 m (7’) straight

ELECTRICAL

Input Voltage Power - Operating Power - Standby Current - Operating Current - Standby DC Transformers Laser Class EMC

5 VDC + 0.25 V 500 mW 110 mW 100 mA typical @ 5 VDC 22 mA typical @ 5 VDC Class 2; 5.2 VDC @ 650 mA CDRH: Class II; IEC 60825-1:1993+A1:1997+A2:2001 FCC, ICES-003 & EN55022 Class B

ENVIRONMENTAL

Operating Temperature Storage Temperature Humidity Light Levels Shock Contaminants Ventilation

0°C to 40°C (32°F to 104°F) -40°C to 60°C (-40°F to 140°F) 5% to 95% relative humidity, non-condensing Up to 4842 Lux (450 footcandles) Designed to withstand 1.5 m (5’) drops Sealed to resist airborne particulate contaminants None required

VoyagerCG is available in the

following colors

Scan Area

249 mm (9.8”)

Bar Code Minimum Element

    • 0.132

      mm (5.2 mil)

    • 0.190

      mm (7.5 mil)

    • 0.264

      mm (10.4 mil)

    • 0.330

      mm (13 mil)

    • 0.533

      mm (21 mil)

64 mm (2.5”) Scan Width at Face

Short Range IR

Long Range IR

Dimensions

198 mm (7.8”)

45 mm (1.8”)

Distance From Face

  • 0

    mm

(0.0”)

102 mm ± 25 mm (4.0” ± 1.0”)

320 mm (12.6”) Width of Scan Field

279 mm ± 51 mm (11.0” ± 2.0”)

IR Activation and Scan Width

78 mm (3.1”)

158 mm (6.2”)

40 mm (1.6”)

Specifications subject to change without notice. Printed U.S.A., Copyright March 2003 Metrologic, All rights reserved.

Metrologic Instruments, Inc. | 90 Coles Road | Blackwood, NJ 08012-4683 Telephone 856-228-8100 or 1-800-ID-METRO | Fax 856-228-6673

DS9540

USA Tel. 1.800.ID.METRO info@metrologic.com

AOA (only) Tel. 1.617.806.1400 info@aoa.metrologic.com

South America Tel. 5511.5182.7273 info@sa.metrologic.com

Brazil (only) Tel. 5511.5182.8226 info@br.metrologic.com

www.metrologic.com

Asia Tel. 65.6842.7155 info@sg.metrologic.com

China (only) Tel. 86.512.62572511 info@cn.metrologic.com

Japan (only) Tel. 81.03.3839.8511 info@jp.metrologic.com

Europe Tel. 49.89.89019.0 info@europe.metrologic.com

  • 0

    mm

(0”)

50 mm (2”)

100 mm 150 mm 200 mm 250 mm

(4”)

(6”)

(8”)

(10”)

Pearl White

Light Grey

Sample only, actual colors may vary

Black

Document info
Document views19
Page views19
Page last viewedSat Nov 26 23:29:11 UTC 2016
Pages4
Paragraphs147
Words907

Comments